拔輪器 >> Pullers
Standard pullers 11050 two-armed, with sliding permanently parallel extractor hooks, zinc plated; for extracting gearwheels, ball bearings, pulleys and similar parts from shafts or axles;for removing ball bearings, bearing ... more
No Picture Arms for pullers No 11050/11051 H 11050
Standard pullers 11053 two-armed, with swivelling extractor hooks for larger reaches, zinc plated;for extracting gearwheels, ball bearings, pulleys and similar parts from shafts or axles;hooks can be used as internal or ... more
Standard pullers 11051 three-armed, with sliding permanently parallel extractor hooks, zinc plated;for extracting gearwheels, ball bearings, pulleys, fan wheels and similar parts from shafts or axles;for removing ball ... more
Pullers 11054 three-armed, with swivelling extractor hooks for larger reaches, zinc plated;for extracting gearwheels, ball bearings, pulleys and similar parts from shafts or axles;hooks can be used as internal or ... more
Pullers 12150 two-armed version with swivelling, double-action extractor hooks, zinc plated;for extracting gearwheels, ball bearings, pulleys and similar parts from shafts or axles;for removing ball bearings, ... more
Three arm pullers 12152 three-armed version with swivelling, double-action extractor hooks, zinc plated;for extracting gearwheels, ball bearings, pulleys and similar parts from shafts or axles;for removing ball bearings, ... more
Two arm pullers 11055 two-armed, with swivelling extractor hooks and lateral clamp clip, zinc plated;when the clamp clip is tightened, the claws of the extractor hooks locate under the part to be extracted and lever it ... more
Battery terminal puller 11040 two-armed, with a self-centring quick-action clamp and automatic feed, zinc plated;for extracting battery terminal clamps, smaller ball bearings, pulleys etc.;as force is applied through the spindle, ... more
Battery terminal puller 11042 three-armed, with a self-centring quick-action clamp and automatic feed, zinc plated;for extracting battery terminal clamps, smaller ball bearings, pulleys etc.;as force is applied through the ... more
Internal puller 11060 for extracting ball bearings, bearing outer races and bushes, zinc plated; to be used with Counter StayNo 11061;even bearings which are tight up against the walls are securely gripped due to the ... more
No Picture Counter stay 11061 to be used with Internal Puller No 11060; zinc plated;insert and open up the internal puller;screw the spindle of the counter-stay into the internal puller;extract the workpiece.
Separating fixture 12613 zinc plated; for use with No 12614 of same sizes;for separating and extracting ball bearings, roller bearings, bushes, wheels and other tightly fitting parts;applying uniform pulling force to the ... more
Pullers 12614 zinc plated; for use with No 12613 of same sizes;for extracting ball bearings, roller bearings, bushes, wheels and other tight fitting parts;the puller is connected to separator No 12613 to enable ... more
Extensions V 12614 for use with puller No 12614;extensions for the extraction bolts on the puller for use with longer workpieces.
Universal wheel hub puller 11030 with three extractor hooks, zinc plated;for extracting wheel hubs on HGV's and cars up to a hole diameter of 225 mm;the axially mounted threaded bush enables the workpiece to be freed by gently ... more
No Picture Arms for No 11030 11035
Universal wheel hub puller 11030-6 with six extractor hooks, zinc plated;for extracting HGV wheel hubs up to a hole diameter of 350 mm;the slot-guided extractor hooks have extra long reach and are absolutely non-slip; gentle tapping ... more
No Picture Arm for No 11030-6 H 11030
Ball joint separators 11041 for forcing out ball pins on vehicles, zinc plated.
No Picture Spindles ID10552
Universal ball joint separator 12616 zinc plated, DIN/ISO 7803, for extracting ball-joints on cars and light delivery vans.
Ball joint separator 12623 zinc plated; for extracting ball-joints especially on BMW, DaimlerChrysler, Fiat, Ford, Nissan, Opel, Toyota, VW/Audi and Volvo cars.
Ball joint separator 12623-1 for vehicles with aluminium chassis; zinc plated;for extracting ball-joints, especially on AUDI A6 and A8 after model year 1999 and for other vehicles with limited work space.
Ball joint separator 12623-2 on medium-sized commercial vehicles, buses and construction site vehicles; zinc plated.
Ball joint separator 12623-3 on heavy goods vehicles, buses and construction site vehicles;zinc plated.
Ball joint separator 12623-4 on medium-sized and heavy HGV's, buses and construction site and other special vehicles; zinc plated
拔輪器 >> Set of pullers
Set: Pullers 11056 consisting of the most common two- and three-armed pullers with two- and three-armed, sliding, parallel extractor hooks.for extracting gearwheels, ball bearings, pulleys and similar parts from shafts ... more