扭力扳手及設備 >> Service MANOSKOP® 730 / 730N
Basic wrenches with tool carrier for insert tools 730N
Basic wrenches with tool carrier for insert tools 730
Basic wrenches with tool carrier for insert tools ID10511
Basic wrench with tool carrier for shell tools, registered design 730
扭力扳手及設備 >> Case for torque wrenches
Plastic case, empty ID11471 for safe storage and transport of torque wrenches (please order inlays separately). Supplied without torque wrench.
No Picture Inlays for plastic case ID11472
扭力扳手及設備 >> BITS-Screwdrivers
BITS 1299 for inside hexagon screws, for operating the adjusting screws on torque wrenches No 720, 721, 730 and 730N.
扭力扳手及設備 >> Standard MANOSKOP® 720
Torque wrenches with square drive 720*
扭力扳手及設備 >> Standard MANOSKOP® 720Nf
Torque wrench with square drive 720Nf
扭力扳手及設備 >> Standard MANOSKOP® 721
Torque wrenches with reversible ratchet 721
Torque wrench set 721/15/5 for wheel assembly on automobiles.Content:1 Torque wrench No 721/154 sockets 1/2" Inside Square with hexagon No 51Ssizes 17; 19; 20.8; 22 mm1 Balance weight pliers No 10599/2
扭力扳手及設備 >> Standard MANOSKOP® 721Nf
Torque wrenches with ratchet 721Nf
扭力扳手及設備 >> Industrial MANOSKOP® 755
Industrial MANOSKOP 755R/1 Torque wrench with built-in ratchet, irrespective of the point of application of force,dual stop signal and cut-out. Guaranteed accuracy ± 4%.Cut-out setting with aid of Setting Gauge.
Basic wrenches with tool carrier for insert tool 755
扭力扳手及設備 >> TORSIOMAX 775
Torque screwdriver "TORSIOMAX" 775 The measuring element:The measuring element is a screw compression spring.Adjustment:The level is set steplessly via a rotary micrometer scale.Safe working methods:These clicking torque screwdrivers ... more
扭力扳手及設備 >> Torque Limiter for Spark Plugs
Universal torque limiter 7600 capacity 15-35 N m, with direct adjustment and left hand lock, with adjustment pin.
No Picture Adjustment pin ES 7600 for No 7600.
Torque limiter 7620 with built-in universal joint, cut-out set at 20 N m, left hand lock.
扭力扳手及設備 >> MANOSKOP® 71
MANOSKOP® 71 71 Indicating torque wrench with a permanent square drive tool carrier and pointer follower. Scale is made of luminescent light yellow special film enabling clear readings even in poor light conditions, ... more
MANOSKOP® 71 71 Indicating torque wrench with pointer follower and carrier for interchangeable insert tools. Scale is made of luminescent light yellow special film enabling clear readings even in poor light ... more
MANOSKOP® 71 with integrated force compensator 71 Indicating torque wrench with pointer follower and carrier for interchangeable insert tools. Scale is made of luminescent light yellow special film enabling clear readings even in poor light ... more
MANOSKOP® 71 with integrated force compensator 71/80 Torque wrench, indicating, with carrier for interchangeable shell tools, registered design, use shell adaptor No 7370/80 to make 14 x 18 mm insert tools fit(max. 400 N m), with pointer follower, ... more
MANOSKOP® 71 with integrated force compensator 71aR/80 Indicating torque wrench with a permanent ratchet and pointer follower. Scale is made of luminescent light yellow special film enabling clear readings even in poor light conditions.Twin scales ... more
扭力扳手及設備 >> Friction gauge
Friction gauge 73Nm/15 Indicating torque wrench with permanently attached square drive and trailing pointer dial. No needle wobble during measurements. Lightweight construction through use of aluminium. Guaranteed maximum ... more
扭力扳手及設備 >> TORSIOMETER 760
Torque screwdrivers TORSIOMETER 760 With 1/4" inside hexagon (F 6.3 DIN 3126), with comparison scale in.lb.Guaranteed accuracy ± 4%.Insert tools:All tools and accessories with hexagon drive shaft E 6.3 (1/4") DIN 3126/ISO ... more
扭力扳手及設備 >> Electronic Torque Wrench
Electronic angle-controlled torque wrenches Sensotork 713R Electronic angle-controlled torque wrench with insert tool pawl-action ratchet, with QuickRelease safety lock, for clockwise and anticlockwise use, readings independent of point of application of ... more
Electronic torque wrench Sensotork 712R Electronic torque wrench with option of attaching interchangeable insert tools, same design as No 713 but without angle function.
扭力扳手及設備 >> Rotational angle measuring tools
GRADOSKOP® torque angle wrench 716R/20 Indicating Torque-Angle Wrench for speedy, safe and simple mechanical tightening of bolts by torque-angle method. The insert ratchet with 1/2" Square -drive may be exchanged for STAHLWILLE ... more
Rotational angle measuring head 7386* registered design, for torque wrenches with insert tool attachment 14 x 18 mm, for angle controlled tightening. Removable magnet for attaching sockets with 1/2" internal square drive.The tenon ... more
Signal emitter 7390* registered design, for rotational angle measuring head No 7386,with battery.
Torque angle gauges 7380N/7385N registered design, for angle controlled bolt/screw tightening, with static read-off point. Read-off possible from any angle thanks to a pair of angled scales. Removable magnet for attaching sockets ... more
扭力扳手及設備 >> Insert tools for torque wrenches
QuickRelease ratchet insert tool 725QR reversible, with QuickRelease safety lock.
Ratchet insert tool 725/B reversible, with inside hexagon,1/4" or 5/16", DIN 3126/ISO 1173 D 6.3 or D8 fordirect acceptance of bits 1/4" or 5/16"outside hexagon C 6.3 (size 4: 22 teeth, size 5: 30 ... more
Ratchet insert tool 725L/5 reversible.Caution! Modified settings on torque wrench .This ratchet insert tool has the same extension length as ring insert tool No 732G/10 and ... more
Ratchet insert tool 725/4 reversible.
Ratchet insert tools 735 reversible.
Ratchet shell tool 735/80 registered design.
Ratchet insert tool 739/20 for Torque-Angle WrenchNo 716/R20
Ratchet insert tool 739/20H axially drilled pinion, locking facility for sockets.For use on Hi-Lok boltsin the aerospace industry.
Square drive insert tools 734
Square drive shell tool 734/80 registered design.
Square drive insert tools 734F with permanently attached, captive square drive.
Square drive insert tool 734L/5 Caution! Modified settings on torque wrench . This square-drive insert tool has the same extension length as ring insert tool No 732G/10 and ... more
Open ended insert tools 731 Size of Insert Tool Carrier in mm (MANOSKOP) (Inside Square) 9 x 12 mm
Open ended insert tools 731 Size of Insert Tool Carrier in mm (MANOSKOP) (Inside Square) 9 x 12 mm
Open ended insert tool 731 Size of Insert Tool Carrier in mm (MANOSKOP) (Inside Square) 14 x 18 mm
Open ended shell tools 731 Size of Insert Tool Carrier in mm (MANOSKOP) (Inside Square) 14 x 18 mm.
Open ended shell tools 731 registered design.Size of Insert Tool Carrier in mm (MANOSKOP) (Outside Square) 24.5 x 28 mm
Ring insert tools 732 Size of Insert Tool Carrier in mm (MANOSKOP) (Inside Square) 9 x 12 mm
Ring insert tools 732 Size of Insert Tool Carrier in mm (MANOSKOP) (Inside Square) 9 x 12 mm
Ring insert tools 732 Size of Insert Tool Carrier in mm (MANOSKOP) (Inside Square) 14 x 18 mm
Ring insert tools 732 Size of Insert Tool Carrier in mm (MANOSKOP) (Inside Square) 14 x 18 mm
Ring insert tools 732 Caution! Modified settings on torque wrench .HPQ high performance steel. Ring end is chrome plated,square drive is gunmetal finish.Size of Insert Tool Carrier in mm ... more
Ring insert tools 732 Size of Insert Tool Carrier in mm (MANOSKOP) (Inside Square) 9 x 12 mmCaution! Modified settings on torque wrench . This insert tool has the same extension length as ... more
Ring insert tools 732aG/10 Size of Insert Tool Carrier in mm (MANOSKOP) (Inside Square) 9 x 12 mm Caution! Modified settings on torque wrench . This insert tool has the same extension length as ... more
Ring insert tools 732 registered designSize of Insert Tool Carrier in mm (MANOSKOP) (Outside Square) 24,5 x 28 mm
No Picture ID6506
TORX® insert tools 732TX Size of Insert Tool Carrier in mm (MANOSKOP) (Inside Square) 9 x 12 mm
TORX® insert tools 732TX Size of Insert Tool Carrier in mm (MANOSKOP) (Inside Square) 14 x 18 mm
Open ring insert tools 733 Size of Insert Tool Carrier in mm (MANOSKOP) (Inside Square) 9 x 12 mm
Open ring insert tools 733 Size of Insert Tool Carrier in mm (MANOSKOP) (Inside Square) 9 x 12 mm
Blank end insert tools 737 gun finish.
Adaptor 7370/10 for using insert tools with an outer square drive of 14 x 18 mm on torque wrenches with an internal square drive of 9 x 12 mm.Long-term loading of the adaptor is restricted to 100 N m. Caution! ... more
Adaptor 7370/40 for using insert tools with an outer square drive of 9 x 12 mm on torque wrenches with an internal square drive of 14 x 18 mm.Long-term loading of the adaptor is restricted to 100 N m. Caution! ... more
Adaptor 7370/40-1 for using shell tools with an internal square drive of 24.5 x 28 mm on torque wrenches with an internal square drive of 14 x 18 mm. Long-term loading of the adaptor is restricted to 650 N m. Caution! ... more
Shell adaptor 7370/80 registered design, for attaching 14 x 18 mm insert tools.Load capacity up to 650 N m. Caution! Modified settings on torque wrench .
扭力扳手及設備 >> Electronic torque tester for torque wrenches
USB cable and software for No 712R, 713R 7757+7052 for statistical analysis of torque readings and recording series of readings on the PC.
Workshop torque tester Sensotork 7707 W Electronic workshop torque tester for torque wrenches, consisting of:* transducer (registered design)* holder* display unit (registered design)* tripod for display unit (with 1.5 m cable)* spiral ... more
Transducers 7721-7723 registered design, high degree of accuracy thanks to conversion and digitalisation of readings within the transducer itself. Not susceptible to lateral forces due to low-profile construction. Within ... more
Display unit 7750 registered design, for displaying the actual torque as measured. Units of measurement: N m, ft.lb, in.lb. Modes of operation: track, peak hold, first peak (only with manual operation), additional ... more
USB cable and software 7757+7731 Connection between transducer and PC, for evaluating data on the PC.
Spiral cable 7752 Connection between transducer and display unit or USB adaptor with jacks at both ends, 90° angled.
Mains adaptor 7755 Input:230 V AC (No 7755/1)110 V AC (No 7755/2)Output: 12 V DC
Square drive adaptor 7787 1/4" socket x 3/4" plug(6.3 x 20 mm).
Square drive adaptor 7788 3/8" socket x 3/4" plug(10 x 20 mm).
Mechanical loaders ID4676 for torque wrenches, ensure uniform loading and precise application of exact forces. First peak is not displayed if display unit No 7750 is used.
Adaptor flange 7785 for mounting transducers (quick and easy change of transducers of various sizes), complements mechanical loaders for torque wrenches No 7540-7541.
Testing mount 7790-1 for calibrating torque screwdrivers No 760, with a swivelling steady. Can be bolted to mechanical loader for torque wrenches No 7540N and No 7541.
Complete calibrating system 7706-6PC 0,2 - 10 N m
Complete calibrating system 7706-7PC 2 - 100 N m
扭力扳手及設備 >> Mechanical torque testers for torque wrenches
Checking Gauges for torque screwdrivers and small capacity torque wrenches 792 Designed for testing torque screwdriver and torque wrenches with low capacity ranges to close tolerances. Fitted with torsion bar as measuring element and available in 3 different capacity ranges.The ... more
Torque wrench tester 798/400 Mechanical tester for torque wrenches, robust and inexpensive; for regular checks on torque wrenches in workshops.Large torque range, clockwise measuring.Measuring element: precision leaf ... more
Tester with mechanical loader for torque wrenches 799/400 Torque wrench tester similar to No 798/400, but with an integrated mechanical loader. Allows precisely the right force to be applied to the torque wrench in an exactly tangential direction and with ... more
扭力扳手及設備 >> Drive tools and accessories 1/4"
Square drive adaptor 409M 1/4" socket x 3/8" plug(6.3 x 10 mm).
扭力扳手及設備 >> Drive tools and accessories 1/2"
Square drive adaptor 7789 1/2" socket x 3/4" plug(12,5 x 20 mm).
扭力扳手及設備 >> MULTIPOWER
MULTIPOWER ID4689 with overload protection and planetary gears, in carrying case, with spare hex. for overload device, guaranteed accuracy ± 5%
扭力扳手及設備 >> MULTIPOWER - spare parts and accessories
Spares for Multipower ID4698 Sun wheel with overload cutout
No Picture Replacement square drives ID4694 drilled, for STAHLWILLE -Multipower STW 390-STW 393 (until 1996).
Protractor STW 7381* for tightening nuts and bolts to specific angles with Multipower torque multiplier No STW 391N and STW 392N.The protractor is attached between the Multipower torque multiplier and an IMPACT ... more
扭力扳手及設備 >> Ratchets spare parts sets for torque wrenches No. 721/15-80
No Picture Ratchet spare parts sets for torque wrenches 721/15-80 ID4703
扭力扳手及設備 >> Spare parts sets for ratchet insert tools
Tool holder ID4724 with tool carrier to receiveinsert tools(without torque function).
No Picture Set of spare parts 7350/5 Content:1 Pinion, 1 Pawl, 1 Switching disk, 1 Spring, 3 Screws
No Picture Set of spare parts 7350/10 Content:1 Pinion, 1 Pawl, 1 Switching disk, 1 Spring, 3 Screws
No Picture Set of spare parts 7350/20 Content:1 Pinion, 1 Pawl, 1 Switching disk, 1 Spring, 3 Screws
No Picture Set of spare parts 7350/40 Content:1 Pinion, 1 Pawl, 1 Switching disk, 1 Spring, 3 Screws
Square drive units 70V for torque wrenches and insert tools.