切管刀、鎚子、銼刀與其它 >> Pipe cutter EXPRESS
EXPRESS pipe cutters 150 with one cutting wheel andtwo guide rollers; for steel,copper, brass, aluminium and hard plastic tubing.
切管刀、鎚子、銼刀與其它 >> Pipe cutters - Accessories and spare parts
Extension lever H150/4 for No 150/4.
Cutting wheels SR150 for steel pipes.
Cutting wheels GR151 for cast iron pipes.
Cutting wheels SR153
Cutting wheels SR155
No Picture Chain K157
Guide rollers ID5185 for pipe cutters.
Spindles ID5189 for wheels and guide rollers.
Spacing washers RI 1500 When required to fit pipe cuttersNo 150/1, 150/2 or No 151/2with 3 cutting wheels(to work in confined spaces)a total of 4 spacing washersRI 1500/1 or RI 1500/2 is required.Simply exchange the 2 guide ... more
切管刀、鎚子、銼刀與其它 >> METAL Pipe Cutter
Steckschlüssel-Garnitur 3/8" Square 153 im stabilen Stahlblechkasten,19-teiligInhalt:12 Steckschlüsseleinsätze mitDoppelsechskant No 45: SW 8; 9;10; 11; 12; 13; 14; 15; 16; 17; 18;19 mm2 Steckschlüsseleinsätze ... more
Small bore pipe cutter 155 for use on Copper-, Brass-,light alloy-, PVC- andthin walled Steel tubes.
切管刀、鎚子、銼刀與其它 >> Chain pipe cutters
Chain pipe cutter 157 infinitely adjustable, with twisthandle, also suitable for specialsteel pipes up to 1.8 mm wallthickness, chain length 270 mm.
切管刀、鎚子、銼刀與其它 >> Flaring tools
Double flaring tool 165 with Clamping Blocks, Flaring Conesand Forming Cone No 1652.
Double flaring tool 165 ma with Clamping Blocks, Flaring Conesand Forming Cone No 1652.9
切管刀、鎚子、銼刀與其它 >> Flaring tools - Accessories and spare parts
Clamping blocks 1650 1 pair
Clamping blocks 1650 ma 1 pair
Flaring cones 1651
Flaring cones 1651
No Picture Forming cones 1652 Standard
No Picture Forming cones 1653* with pressure limiter for tubes up to 5 mm diameter
No Picture Spare parts 1655 for Double Flaring Tool No 165. Flaring Spindle, complete.
No Picture Spare parts 1656 for Double Flaring Tool No 165. Clamping Screw, complete.
切管刀、鎚子、銼刀與其它 >> Rubber- and plastic-hammers
Rubber composition hammers 10940 DIN 5128, with two plane faces.
Plastic hammers 10955 with interchangeable heads ofimpact resisting Cellulose Acetateand Ash Handles.
No Picture Spare plastic heads 10955R of impact resisting Cellulose Acetate, these are lightly heated and then tapped into position.
Nylon hammers 10956 with interchangeable headsof shockproof Nylon Vestamidand EUROPLUS Handles.
No Picture Spare nylon heads 10956R these are lightly heated and then tapped into position.
Plastic hammers 10957 recoilless;with interchangeable headsand Hickory Handles.
No Picture Spare plastic heads 10957R
切管刀、鎚子、銼刀與其它 >> Various hammers
Embossing hammer 10958 aluminium, cylindrical,with Hickory-Handle.
Engineers hammers 10960 with Ash Handles, DIN 1041.
Engineers hammers 10970 with Ash Handles.
切管刀、鎚子、銼刀與其它 >> Tool sets in plastic trays
Set of hammers ES 10956/10960/2 175 x 350 x 45 mm, 2 pieces
No Picture Empty inlay ID11775
Set of hammers ES 10956/10970/2 175 x 350 x 45 mm, 2 pieces
No Picture Empty inlay ID11778
Chisels and parallel pin punches ES 102/108/109/4 175 x 350 x 30 mm, 4 pieces
No Picture Empty inlay ID11781
Chisels, centre punches and parallel pin punches ES 102/105/108/8 175 x 350 x 33 mm, 8 pieces
No Picture Empty inlay ID11784
Files, measuring equipment etc. ES 10670-13110/11 530 x 350 x 35 mm, 11 pieces
No Picture Empty inlay ID11793
切管刀、鎚子、銼刀與其它 >> Chisels
Ribbed cold chisels 100 of tough tempered special steel, chrome plated.
Ribbed cross-cut chisels 101* of tough tempered special steel, chrome plated.
Cold chisels 102 DIN 6453, Chrome VanadiumSteel, lacquered silver.
Cross-cut chisels 103 DIN 6451, flat, Chrome VanadiumSteel, lacquered silver.
Grooving chisel 110 flat, Chrome Vanadium Steel,lacquered silver.
Grooving chisel 112 as No 110,but with finger protector.
No Picture Finger protector 112/1 for Cold Chisels No 102 and Cross-cut Chisels No 103 from200 mm onward, shaft section 23 x 13 mm.
切管刀、鎚子、銼刀與其它 >> Drift pins
Drift pins 104 DIN 6458, octagonal,Chrome Vanadium, lacquered silver.
切管刀、鎚子、銼刀與其它 >> Centre punch
Centre punches 105 DIN 7250, octagonal,Chrome Vanadium, lacquered silver.
切管刀、鎚子、銼刀與其它 >> Pin punch
Parallel pin punches 108 DIN 6450, octagonal,Chrome Vanadium, lacquered silver.
Pin punches 109 with guide bush.
切管刀、鎚子、銼刀與其它 >> Chisels, Driving pins, centre punches
Sets: Chisels, pins, punches 102-5/6 6 piecescontent: 1 eachNo 106/125 mmNo 106/150 mmNo 107/125 mmNo 104/120 x 2; 120 x 4 mmNo 105/120 x 10 mm
Sets: Drift pins, centre punches 104-5/6 6 piecesContent: 1 eachNo 104/120 x 2; 120 x 3; 120 x 4; 120 x 5; 120 x 6 mmNo 105/120 x 10 mm
Pin punch - centre punch set 105-8/6K 6 pieces in transparent plasticcontainer stand.Content: 1 eachNo 108/150 x 2,5; 150 x 3; 150 x 4; 150 x 5; 150 x 6 mm; DIN 6450/ Form C No 105/120 x 10 mm; DIN 7250
Sets: Parallel pin punches 108/6 6 piecesContent: 1 eachNo 108/150 x 2,5; 150 x 3; 150 x 4; 150 x 5; 150 x 6; 150 x 8 mm


切管刀、鎚子、銼刀與其它 >> Tool sets in TC system trays
Hammer, chisels etc. in TCS inlay TCS 102-109/10956/10960/6 175 x 350 x 40 mm, 6 pieces
Hammer, chisels etc. in TCS inlay TCS 102-108/10957/10960/12 530 x 350 x 40 mm, 12 pieces
Hammer, chisels etc. in TCS inlay TCS 102-108/10957/10960/13 530 x 350 x 60 mm, 13 pieces
Files in TCS inlay TCS 11006-12931/8 530 x 350 x 40 mm, 8 pieces
Torches in TCS inlay TCS 13126/13127/2 175 x 350 x 60 mm, 2 pieces
切管刀、鎚子、銼刀與其它 >> Scrapers
Three square engineers scrapers 10670 special steel.
Flat engineers scrapers 10672 special steel.
Three square engineers bearing scrapers 10676 special steel.
切管刀、鎚子、銼刀與其它 >> Files
Engineers file, round 12025
Engineers file, half round 12030
Engineers file, three-square 12035
Engineers file, hand 12036
Hand vice 12200 forged C 35,width of jaws 48 mm.
切管刀、鎚子、銼刀與其它 >> Hacksaws
Tubular hacksaw 12050 adjustable,with blade size 300 mm/12".
Hacksaw frame 12053
切管刀、鎚子、銼刀與其它 >> Spare hacksaw blades
No Picture Spare hacksaw blades for No 12050 ID10159
No Picture Spare hacksaw blades for No 12053 ID10160
切管刀、鎚子、銼刀與其它 >> Tools for threads
Stud remover set 905/25 M 5 - M 16, 3/16" - 5/8", 25 pieces,in green plastic box.
No Picture Spare parts 906 Removal pins and splined nuts,in pairs in plastic bags.
Universal thread restorers 12000 suitable for inside- andoutside threads.
Screw pitch gauge 12665 0.25 to 6 mm and 4 to 62 t.p.i.(metric/Whitworth threads).
切管刀、鎚子、銼刀與其它 >> Screw extractors and nutsplitters
Screw EXTRACTOR set 900/6Pc in green plastic bag.
Screw EXTRACTOR 900
Stud remover 904 · Suitable for all sizes of studsfrom 6-12 mm · Also suitable for percussionscrewdriver use.· Will cope with rusted or scale-coated screws with aminimum of 3 mm protruding.Chuck: size ... more
Nut splitters 12615 galvanised, for splittingNuts of quality rangeup to 8.8 (55 tpsi).
Hydraulic nutsplitter 12615-3 galvanized;for splitting seized nuts up to quality 10.8. The slim neck allows the tool to be used even in confined spaces. The hydraulic mechanism reduces the effort required considerably.Note: ... more
切管刀、鎚子、銼刀與其它 >> Measuring tools
Vernier calliper 12900N as per DIN 862,vernier readings 1/20 mm and1/128", stainless steel,c/w plastic pouch.
Vernier calliper 12900/1N with a large digital display, automatic shut-off, switch for mm/inches, depth gauge, RS232C interface, spare battery, differential measurements by means of 0 reset function, display accuracy 0.01 mm ... more
Brake disc gauge 12900/2N DIN 862, for measuring the thickness of car and motorcycle brake discs in situ, stainless steel, with locking screw and trailing vernier scale (1/10 mm), in leather pouch.
Tape measure 12931 with tape lock. Metric-Inch scales.
Workshop micrometers 12935N chrome plated.
Steel rule 13110 Metric-Inch scales,length 300 mm.
切管刀、鎚子、銼刀與其它 >> Ratchet tap holder
Ratchet tap holders 12915 steel, chrome plated
切管刀、鎚子、銼刀與其它 >> File sets
Set warding files 12800 6 pieces, in Pc-wallet, DIN 7283,Content: 1 file each, hand,flat, half round, three square, square, round
Set of needle files 13100 6 pieces, in plastic wallet,Content: 1 file each,round, half round,three square, square,hand, flat
切管刀、鎚子、銼刀與其它 >> Workshop accessories
Padlock 12932
Force feed oil can 12250 metal container, brass pump.Content: 500 ccm
Plastic oil can 12251 Content: 250 ccm
Set magneto spanners 12300* on ring, 11 pieces.Content:8 Spanners 4-7.5 mm1 Feeler Gauge Blade1 Screwdriver Blade1 Contact File Blade
Electricians cable knife 12320 with stainless blade.
Engineers scriber 12321
Wire brush 12374 wood, steel wire dia. 0.35 mm.
Wire brush 12377 with brass coated steel bristles.
File brush 12378
Brass wire brush 13115 for use on light alloys.
Scraper 12481
Magnetic lifters 12600
Adjustable hook spanners 12910 for slotted nuts as per DIN 1810,adjustable.
Telescopic mirror 12920N with non-twisting, oval-section telescopic rod.
No Picture Replacement mirror 12920NR-1
No Picture Stainless steel replacement mirror for No 12920N 12920NR-2
Telescopic mirrors 12921N
No Picture Replacement mirror 12921NR
Telescopic mirror 13120 with illumination and concave mirror,in wooden box, with battery.
Claw lifter 12922
Soldering gun 12941 230 V, 50-60 Hz, 100 W.
No Picture Replacement tips for soldering gun No 12941 ID5439
Soldering iron 12942 230 V, 50-60 Hz, 20/40 W.
Soldering iron 12943 230 V, 50-60 Hz.
No Picture Replacement tips for No 12942, 12943 ID5442
Universal cutter 12965 with hole for hanging up and5 spare blades in handle, bladeis adjustable by moving slide,suitable for cutting card, rubber,leather, wood.
Safety knife 12965-1 In holster, very high-grade, sturdy design, with 3-way adjuster, completely retractable blade.With hanging hole and holster with belt clip. Supplied with one blade mounted and one spare blade in the ... more
No Picture Spare blades 12965R 5 pieces.
Torch 13126 ABS body with high-impact polycarbonate lens. Approved by FM, CSA, AUS and MSHA as non flammable. Laser-SPOT xenon lamp module generates a finely focussed white collimation light beam with a net ... more
Torch 13127 Made of high-impact polycarbonate resin developed for space use. Focussed beam; with light deflector. Approved by FM, SA, and CENELEC as non flammable. Suitable for underwater use. Waterproof to 150 ... more
No Picture Spares for torches ID10559
Tweezers 13130 straight, blunt,finely milled inside,stainless steel.
Tweezers 13131 bent, blunt, finely milled inside,stainless steel.
Wire cutter 13135 with smooth cutting edges,nickel-plated,plastic covered handles.