鉗子 >> Combination Pliers
Combination pliers 6501 DIN ISO 5746, precision cutter for all wires, incl. piano wire, induction hardened cutting edges, approx. 62 HRC, for long life.
鉗子 >> Flat Nose Pliers
Flat nose pliers, long 6508 DIN ISO 5745, long, flat serrated jaws.
Flat nose pliers, long, with cutter 6509 designed for gripping and manipulating electronic components, long, thin, flat serrated jaws, induction hardened cutting edges, approx. 60 HRC, for soft and hard wires.
Mechanics flat nose pliers 6510 designed for use in fine mechanical and electronics industries, flat, slim, long serrated jaws, box joint, for long life, serrated gripping areas.
Mechanics flat nose pliers 6516 designed for use by instrument mechanics, flat blunt, serrated jaws, wear resistant.
鉗子 >> Relay pliers
Relay pliers 6511 DIN 5235, Form A, flat pointed, for use on contact and relay springs and on small components, smooth jaws.
Relay pliers 6512 DIN 5235, Form B, flat blunt, for use on contact and relay springs and on small components, smooth jaws.
鉗子 >> Relay pliers, bent
Relay pliers 6513 DIN 5235, Form C, flat bent, 45° in line with jaws, for use on contact and relay springs and on small components, smooth jaws.
Relay pliers 6514 DIN 5235, Form E, flat bent, 90° angle to jaws, for use on contact and relay springs and on small components, smooth jaws.
Relay pliers 6515 DIN 5235, Form D, flat bent, 75° angle to jaws, for use on contact and relay springs and on small components, smooth jaws.
鉗子 >> Mechanics gripping pliers
Mechanics gripping pliers 6518 Form A, flat blunt, designed for use by instrument mechanics, wide precision jaws, smooth, tapering to 1.5 mm, box joint for precise movement.
Mechanics gripping pliers 6519 Form B, flat pointed, designed for use by instrument mechanics, flat pointed precision jaws, smooth, tapering to 1.5 mm, box joint for precise movement.
鉗子 >> Round Nose Pliers
Round nose pliers, short 6523 DIN ISO 5745, for bending wire loops and rings, short, round, ground jaws, fine serrations on gripping areas.
Round nose pliers, long 6524 DIN ISO 5745, for bending wire loops and rings, long, round, ground jaws, fine serrations on gripping areas.
Mechanics round nose pliers 6525 for bending wire loops, round precision jaws, smooth, 1.0 point diameter, box joint for precise movement.
鉗子 >> Snipe Nose Pliers
Snipe nose pliers with cutter (radio- or telephone pliers) 6529 DIN ISO 5745, Form A (straight), half round, long tapering, serrated jaws, with burner hole, precision cutters for soft and hard wires, induction hardened cutting edges, approx. 60 HRC.
Mechanics snipe nose pliers 6531 Form A (straight), designed for use on miniature electronic and mechanical components, haft round extra thin, long tapering jaws with fine serration, box joint for precise movement.
Mechanics snipe nose pliers 6533 half round, long tapering, serrated jaws.
Mechanics snipe nose pliers 6534 Form A (straight), half round, long tapering, serrated jaws.
Mechanics snipe nose pliers 6538 designed for use on miniature mechanical components half round tapering jaws, wear resisting serration.
Snipe nose pliers (needle pliers) 6536 DIN ISO 9655, Form A (straight), designed for use on electronic components, half round, extra long tapering jaws, fine serration.
鉗子 >> Snipe nose pliers, bent
Snipe nose pliers with cutter (Radio- or Telephone Pliers) 6530 DIN ISO 5745, Form B, bent 45°, half round, long tapering, serrated jaws, with burner hole, precision cutters for soft and hard wires, induction hardened cutting edges, approx. 60 HRC.
Mechanics snipe nose pliers 6532 Form B, bent 45°, designed for use on miniature electronic and mechanical components, half round extra thin, long tapering jaws with fine serrations, box joint for precise movement.
Mechanics snipe nose pliers 6535 Form B (bent 45°), half round, long tapering, serrated jaws.
Snipe nose pliers (needle pliers) 6537 Form B, bent 45°, designed for use on electronic components, half round, extra long tapering jaws, fine serration.
鉗子 >> Circlip Pliers
Circlip pliers for inside circlips 6543 DIN 5256 C, straight, H.D. drop forged, precision points.
Circlip pliers for outside circlips 6545 DIN 5254 A, straight, H.D. drop forged, precision points, with wear resistant compression spring.
鉗子 >> Circlip pliers, bent
Circlip pliers for inside circlips 6544 DIN 5256 D, bent 90°, H.D. drop forged, precision points.
Circlip pliers for outside circlips 6546 DIN 5254 B, bent 90°, H.D. drop forged, precision points, with wear resistant compression spring.
鉗子 >> Special circlip pliers
Special circlip pliers for slotted circlips 6547 for slotted circlips (as used on shafts of engines, gearboxes, differentials, clutches etc.), with wear resistant compression spring.
鉗子 >> Waterpump Pliers
Waterpump pliers 6551 DIN ISO 8976 (No 207 c), box joint, 7 adjustment positions, anti-squeeze protection, Chrome Vanadium.
Waterpump pliers FIXGRIP 6570 DIN ISO 8976 (No 207 c), with box joint and slot, 7-position rapid-adjustment via push-button, durable compression spring, protection against dirt due to fully enclosed adjustment mechanism, Chrome ... more
Waterpump pliers, with rapid adjustment 6554 DIN ISO 8976 (No 207 c), box joint "hook" adjustment, jaw with slot, Chrome Vanadium.
No Picture Spare springs for No 6554 ID10228
MINI-waterpump pliers 6555 Chrome Vanadium.
鉗子 >> Pipe wrenches
Pipe wrenches 6549* Type B, 45°, DIN 5234.
Swedish pattern wrenches 6556* Type A, 90°, DIN 5234.
S-shaped Swedish pattern wrenches 6557* Type C, DIN 5234.
"Heavy Duty" pipe wrenches 6558 US-standard GGG-W-651 Type II, category A.
"Stillson" pipe wrenches 6559 US-standard GGG-W-651 Type I, category A.
鉗子 >> Various gripping pliers
Wire twisting pliers 6575 registered design, for wire locking of metal fasteners, with side cutter, serrated jaws for positive grip, jaws angled by 40°, suitable for locking wires up to Diameter in mm 1.6 mm (dec. in. ... more
Connector pliers 6576 replaceable plastic jaws, 4 adj. positions, for use on screw connections incl. Canon-connectors, or any light alloy or other tube connections, surfaces of which must not be damaged, Chrome Vanadium.
No Picture Loose plastic jaws for No 6576 ID10227
鉗子 >> Side Cutters
Side cutters standard bevel 6600 DIN ISO 5749, Form B, precision cutter for all wires incl. piano wire, high quality alloy steel, bevelled cutting edges induction hardened, approx. 63 HRC.
Side cutter semi flush cutting 6601 as No 6600, mini bevel, fitted with double leaf spring.
Heavy duty side cutters standard bevel 6602 DIN ISO 5749, Form A, precision cutter for all wires incl. piano wire, high quality alloy steel, bevelled cutting edges induction hardened, approx. 63 HRC.
Lever action side cutters 6608 DIN ISO 5749, for piano wire, special steel.

 

鉗子 >> Self Grip Wrenches
Wide jaw self grip wrench 6561 80 mm jaw width, quick release lever, Chrome Vanadium.
Parallel jaw self grip wrench 6562 forged jaws, quick release lever, Chrome Vanadium.
Parallel jaw self grip wrenches 6562/16562/2 forged jaws, quick release lever, for small, V-cutout in one jaw specially designed for gripping round parts firmly and securely and also suitable for larger workpieces, also ideal for gently ... more
No Picture Plastic protective jaws for parallel jaw self grip wrenches No 6562/1 and No 6562/2 ID11465 1 pair, provides additional protection for clamped workpieces.
Universal self grip wrenches 6563 forged jaws (one straight, one contoured), quick release lever, Chrome Vanadium.
Self grip wrenches 6564 forged contoured jaws, quick release lever, wire cutter, Chrome Vanadium.
Welders self grip wrench 6565 with quick release lever, Chrome Vanadium.
Pipe welders self grip wrench 6566 with quick release lever, Chrome Vanadium.
C-Clamp self grip wrench 6567 with quick release lever, Chrome Vanadium.
Long reach grip wrenches 6568 extra large capacity, quick release lever, Chrome Vanadium.
Long nose self grip wrench 6571 specially suitable for narrow, tapering access, with quick-release lever, Chrome Vanadium.
鉗子 >> Oblique Cutters
Mechanics oblique cutters semi flush cutting 6612 suitable for use on miniature mechanical and electronic components, precision cutting edges for hard and soft wire head angled by 28°,Cu-wire 0,25 mm Diameter in mm may be cut at tips, alloy ... more
鉗子 >> Top Cutters
Top cutters, heavy duty standard bevel 6618 DIN ISO 5748, precision cutting edges for all wires, incl. piano wire, alloy steel of highest quality, induction hardened bevelled cutting edges,approx. 63 HRC.
Lever action top cutters 6617 DIN ISO 5748, for piano wire, special steel.
鉗子 >> Wire Stripping Pliers
Battery pliers 6550 Chrome Vanadium.
Wire stripping pliers 6622 with adjustment screw to cut insulation only on wire or cable, max. 5 mm Diameter in mm 10 mm#h2#conductor cross-section.
Wire stripping pliers 6623 for wires from 0.5 to 5 mm Diameter in mm , self adjusting, cutter hole for cutting wire or stranded wires up to 5 mm Diameter in mm , special steel.
No Picture Replacement stripping knives (1 pair) for No 6623 ID10199
Wire stripping pliers 6624 for wires from 0.3 to 1.2 mm Diameter in mm , self adjusting, cutter hole for cutting wire or stranded wires up to 5 mm Diameter in mm , special alloy steel.
鉗子 >> Cable Shears
Cable shears 6630 for copper- and light alloy cables. Easy, single handed operation. Special cutter geometry to avoid pressure marks and frayed ends, adjustable joint, anti-squeeze protection, not suitable for steel- ... more
鉗子 >> Crimping Pliers
Crimping pliers 6634 for reliable crimping of terminal sleeves DIN 46228, 8 deep slots with tapering side walls, crimping within the size marked profiles in one operation.
鉗子 >> Various Cutting Pliers
Steel fixers pincers 6660 DIN ISO 9242, quality steel.
Pincers 6661 DIN ISO 9243, quality steel.
鉗子 >> Tool sets in plastic trays
Set with 4 pliers, chrome plated 6702 Handles chequered, in plastic inlay (modular system see page 32-41)
Set with 3 pliers, polished 6706 dip-coated, in plastic inlay (modular system see page 32-41)
Set with 3 pliers, chrome plated 6703 with H.D. sleeves, in plastic inlay (modular system see page 32-41)
Set with 3 pliers, polished 6705 dip-coated, in plastic inlay (modular system see page 32-41)
Set with 3 pliers, chrome plated 6704 with H.D. sleeves (No 6501, 6602), in plastic inlay (modular system see page 32-41)
Set of pliers ES 6501-6602/7A 530 x 350 x 40 mm, 7 pieces
No Picture Empty inlay ID11765
Set of pliers ES 6501-6602/7B 530 x 350 x 40 mm, 7 pieces
No Picture Empty inlay ID11768
鉗子 >> Tool sets in TC system trays
Set of pliers in TCS inlay TCS 6501-6602/4 175 x 350 x 35 mm, 4 pieces
Set of pliers in TCS inlay TCS 6543-6564/3 175 x 350 x 30 mm, 3 pieces
鉗子 >> Electronics pliers
Electronics flat nose pliers for use on electronic components 6517 DIN ISO 9655, designed for use on miniature electronic and mechanical components, welded on double leaf spring, precision jaws, smooth, tapering to 1 mm, box joint for precise movement.
Electronics round nose pliers for use on electronic components 6526 DIN ISO 9655, designed for use on miniature electronic and mechanical components, welded on double leaf spring, round precision jaws, smooth, thin, 1.25 mm point diameter, box joint for precise ... more
Electronics snipe nose pliers for use on electronic components 6540 DIN ISO 9655, designed for use on miniature electronic and mechanical components, welded on double leaf spring, half round, smooth precision jaws tapering to 1 mm Diameter in mm , box joint for ... more
Electronics side cutters for use on electronic components semi flush cutting 6603 strong, slim pattern, suitable for use on miniature electronic components precision cutting edges, mini bevel, suitable for soft and hard wire, incl. piano wire, Cu-wire of 0.2 mm Diameter in mm can ... more
Electronics side cutters for use on electronic components semi flush cutting 6605 DIN ISO 9654, with wire catch to prevent uncontrolled disposal of off-cuts, box joint for precise movement, precision cutting edges, mini bevel, suitable for soft and hard wire, welded on double leaf ... more
Electronics side cutters for use on electronic components semi flush cutting 6606 DIN ISO 9654, strong model, box joint for precise movement, precision cutting edges, mini bevel, suitable for piano wire, Cu-wire 0.25 mm Diameter in mm , can be cut at tips, welded on double leaf ... more
Electronics side cutters for use on electronic components full flush cutting 6607 DIN ISO 9654, slim tapered head for use in confined spaces, box joint for precise movement, precision cutting edges, no bevel suitable for flush cutting of soft and medium hard wire Cu- and diode ... more
Mini-electronics side cutters for use on electronic components semi flush cutting 6604 DIN ISO 9654, light, slim pattern, especially suitable for use on miniature electronic components, precision cutting edges, mini bevel, suitable for soft and hard wire, Cu-wire of 0.2 mm Diameter in ... more
Electronics oblique cutters for use on electronic components semi flush cutting 6613 DIN ISO 9654, tapered head for use in confined spaces, precision cutting edges for hard and soft wire, head angled by 55°, Cu-wire 0.25 mm Diameter in mm may be cut at the tips, welded on ... more
Electronics oblique cutters for use on electronic components full flush cutting 6614 DIN ISO 9654, as No 6613, but without bevelled cutting edges, for flush cutting of soft and medium hard Cu- and diode wires.
Electronics oblique cutters for use on electronic components semi flush cutting 6615 DIN ISO 9654, slim, extended head for delicate cuts in confined spaces, box joint for precise movement, precision cutting edges with mini bevel for Cu- and diode wires, head angled by 30°, ... more
Electronics top cutters for use on electronic components semi flush cutting 6619 DIN ISO 9654, slim long head for use in confined space, box joint for precise movement, precision cutting edges for Cu- and diode wires, mini-bevel, welded on double leaf spring, alloy steel of ... more
Electronics top cutters for use on electronic components semi flush cutting 6620 DIN ISO 9654, precision cutting edges for soft and hard wires, mini-bevel, head angled 90°, pointed head, Cu-wire 0.25 mm Diameter in mm may be cut at the tips, welded on double leaf spring, ... more
Electronics top cutters for use on electronic components full flush cutting 6621 DIN ISO 9654, as No 6620, but without bevelled cutting edge, for flush cutting of soft and medium hard Cu- and diode wires, alloy steel of highest quality, induction hardened cutting edges, approx. ... more
鉗子 >> VDE pliers
Combination pliers 6501 DIN ISO 5746, precision cutter for all wires, incl. piano wire, induction hardened cutting edges, approx. 62 HRC, for long life.
Flat nose pliers, long 6508 DIN ISO 5745, long, flat serrated jaws.
Round nose pliers, short 6523 DIN ISO 5745, for bending wire loops and rings, short, round, ground jaws, fine serrations on gripping areas.
Round nose pliers, long 6524 DIN ISO 5745, for bending wire loops and rings, long, round, ground jaws, fine serrations on gripping areas.
Snipe nose pliers with cutter (radio- or telephone pliers) 6529 DIN ISO 5745, Form A (straight), half round, long tapering, serrated jaws, with burner hole, precision cutters for soft and hard wires, induction hardened cutting edges, approx. 60 HRC.
Snipe nose pliers with cutter (radio- or telephone pliers) 6530 DIN ISO 5745, Form B, bent 45°, half round, long tapering, serrated jaws, with burner hole, precision cutters for soft and hard wires, induction hardened cutting edges, approx. 60 HRC.
Mechanics snipe nose pliers 6533 half round, long tapering, serrated jaws.
Side cutters standard bevel 6600 DIN ISO 5749, Form B, precision cutter for all wires incl. piano wire, high quality alloy steel, bevelled cutting edges induction hardened, approx. 63 HRC.
Heavy duty side cutters standard bevel 6602 DIN ISO 5749, Form A, precision cutter for all wires incl. piano wire, high quality alloy steel, bevelled cutting edges induction hardened, approx. 63 HRC.
Wire stripping pliers 6622 with adjustment screw to cut insulation only on wire or cable, max. 5 mm Diameter in mm 10 mm#h2# conductor cross-section.
Wire stripping pliers 6623 for wires from 0.5 to 5 mm Diameter in mm , self adjusting, cutter hole for cutting wire or stranded wires up to 5 mm Diameter in mm , special steel.
No Picture Replacement stripping knives (1 pair) for No 6623 ID10200
Wire stripping pliers 6624 for wires from 0.3 to 1.2 mm Diameter in mm , self adjusting, cutter hole for cutting wire or stranded wires up to 5 mm Diameter in mm , special alloy steel.
Cable shears 6630 for copper- and light alloy cables. Easy, single handed operation. Special cutter geometry to avoid pressure marks and frayed ends, adjustable joint, anti-squeeze protection, not suitable for steel- ... more