特殊汽修工具 >> KABELEX® sets
Tool set KABELEX® 1510 VW/Audi 11 pieces, for VW/Audi, Seat, Skoda, Porsche.
Tool set KABELEX® 1520 Daimler Chrysler 16 pieces, for DaimlerChrysler.
Tool set KABELEX® 1540 Opel 17 pieces, for Opel/GM.
Tool set KABELEX® 1550 BMW 13 pieces, for BMW.
Tool set KABELEX® 1700 MAN/Volvo 14 pieces, for MAN/Volvo, DaimlerChrysler trucks.
Tool set KABELEX® 1720 Renault/PSA 7 pieces, for Renault/PSA (Citroën and Peugeot).
Tool set KABELEX® 1730 Porsche 16 pieces, for Porsche.
Tool set KABELEX® 1730/1 Porsche-Cayenne 8 pieces, for Porsche Cayenne.
Tool set KABELEX® 1560 10 pieces, for round plug connections (incl. ABS).
Basic set KABELEX® 1570/1 6 pieces.
Universal set KABELEX® 1570/2 12 pieces.
Tool set KABELEX® 1590 5 pieces, for flat plug-in sockets.
特殊汽修工具 >> STAHLWILLE -KABELEX® Protect
Ejection tools KABELEX® 1501-1508 for round snap-in receptacles, including dismantling sleeve.
Dismantling sleeves KABELEX® 1511-1518
Assembly sleeve KABELEX® ABS 1523
Cable extractor tools KABELEX® 1551/1552 registered design, for flat snap-in receptacles e.g. BMW, Ford, Opel, Porsche, Seat, Skoda, VW/Audi.
Cable extractor tools KABELEX® 1553-1555 registered design, for flat plug-in sockets locked in terminals with single release channel.
Cable extractor tool KABELEX® 1556 registered design, for flat plug-in sockets, Micro Timer II, III contacts, e.g. DaimlerChrysler, Opel, Porsche, PSA, Renault, Saab, Seat, Skoda, VW/Audi.
Cable extractor tool KABELEX® 1556-1 registered design, for flat plug-in sockets with asymmetrically positioned latches in terminals with two release channels, Seat, Skoda, VW/Audi.
Cable extractor tools KABELEX® 1557/1558 registered design, for flat plug-in sockets with asymmetrically positioned latches in terminals with two release channels, Seat, Skoda, VW/Audi.
Cable extractor tool KABELEX® 1559 registered design, for flat plug-in sockets, Maxi Power Timer contacts, DaimlerChrysler, VW/Audi.
Cable extractor tool KABELEX® 1562 registered design, for flat plug-in sockets,Pit-Pod contacts, all vehicle makes.
Cable extractor tools KABELEX® 1563/1564 registered design, for flat plug-in sockets, Ducon contacts in terminals with single release channel, Opel.
Cable extractor tools KABELEX® 1565-1568 registered design, for flat plug-in sockets, Ducon-contacts in terminals with two release channels, Opel.
Cable extractor tool KABELEX® 1572 registered design, for flat plug-in sockets with asymmetrically positioned latches in terminals with two release channels, Ford, Renault.
Cable extractor tool KABELEX® 1573 registered design, for secondary locking device,Ford, Mazda.
Cable extractor tool KABELEX® 1574 registered design, for flat plug-in sockets, Micro-Timer I contacts and ABS plug-in housing, Fiat, Ford, Mazda, Opel, PSA, Renault, Saab, VW/Audi.
Cable extractor tool KABELEX® 1575 registered design, for round soldered pin contacts, Ford, for flat plug-in sockets (retention by locking device on terminal), Fiat, Mazda, Toyota.
Cable extractor tool KABELEX® 1576 registered design, for flat plug-in sockets with single latch (flat plug without box), e.g. MAN.
Cable extractor tool KABELEX® 1577 registered design, for flat plug-in sockets, VKR Box contacts, e.g. MAN.
Cable extractor tool KABELEX® 1577-1 registered design, for flat plug-in sockets, MKR/MKS contacts, e.g. MAN/Volvo.
Cable extractor tool KABELEX® 1578K-1 registered design, for flat plug-in sockets, SLK contacts (primary),e.g. BMW, DaimlerChrysler.
Cable extractor tool KABELEX® 1578K-2 registered design, for flat plug-in sockets, SLK contacts 97 (primary, secondary), e.g. BMW, DaimlerChrysler.
Cable extractor tools KABELEX® 1584/1585 registered design, for round soldered contacts, DaimlerChrysler.
Cable extractor tool KABELEX® 1587 registered design, for flat plug-in sockets,E-95 contacts, DaimlerChrysler.
Cable extractor tool KABELEX® 1588 registered design, for GSK flat fuse contacts (1, 2 and 3 terminal version; 2, 4 and 6 latches), DaimlerChrysler.
Cable extractor tool KABELEX® 1589K registered design, for flat plug-in sockets, LSK contacts, e.g. BMW, DaimlerChrysler.
Cable extractor tools KABELEX® 1591 registered design, for flat plug-in sockets in terminals with two release channels, Junior Power Timer contacts, Standard Power Timer contacts, e.g. BMW, DaimlerChrysler, Fiat, Ford, MAN, Opel, PSA, ... more
特殊汽修工具 >> Special Tools for Ignition and Electrics
Universal torque limiter 7600 15-35 N m, 3/8" Inside Square -drive, with in-built torque trip value if requested (price available on request).
No Picture Adjustment pin ES7600 for No 7600.
Torque limiter 7620 3/8" Inside Square -drive, incl. universal joint,cut-out set at 20 N m.
Spark plug socket 3466 3/8" Inside Square -drive, with magnet, outside dia 25.5 mm, for deep seated plugs.
Spark plug socket 4600 3/8" Inside Square -drive, with rubber insert.
Spark plug socket 4660 3/8" Inside Square -drive, with magnet,outside hexagon 19 mm.
Spark plug socket 4606 3/8" Inside Square -drive, with rubber insert.
Tubular spark plug socket 1042 3/8" Inside Square -drive.
Tubular spark plug socket 1043 3/8" Inside Square -drive, extra long, with rubber insert, for deeply recessed, difficult-to-reach spark-plugs with M12 x 1.25 mm threads.
Spark plug spanner 1052* 3/8" Inside Square -drive, with rubber insert, length adjustable to 123, 152 and 182 mm.
Spark plug socket 46 3/8" Inside Square -drive, with rubber insert.
Spark plug socket 46M* 3/8" Inside Square -drive, with magnet.
Spark plug sockets 51 1/2" Inside Square -drive.
Spark plug socket 51S 1/2" Inside Square -drive,
Spark plug socket 1040* 1/2" Inside Square -drive, with universal joint and rubber insert.
特殊汽修工具 >> Tools for spark plugs
T-handle universal joint 4328* with rubber insert.
Rubber insert 5100 for size 20.8 mm(No 46; 466; 51; 51S; 1040; 4328).
Spark plug connector pliers 10626 forged, with 45#h0# offset, curved jaws, for extracting and replacing sparkplug connectors.
特殊汽修工具 >> Heater plug tools
Ratchet ring spanner 25GK angled, extra long, for hard-to-reach heater plugs (e.g. BMW, DaimlerChrysler, Peugeot, Renault, Seat, VW/Audi), size 8 mm for contact rail bolts, size 12 mm for diesel heater plugs, chrome plated.
Spark plug sockets 3047 extra long, for hard-to-reach heater plugs, 3/8" Inside Square -drive, size 10 mm e.g. for Renault, VW/Audi TDi;size 12 mm e.g. for BMW, DaimlerChrysler (201, 202 four-valve technology), Ford, ... more
Heater plug socket pliers 10627 forged, curved jaws with milled grip,for accessing tight-fitting, awkward-to-reach heater plug connectors (e.g. BMW, DaimlerChrysler, Peugeot, Renault, Seat, VW/Audi).
特殊汽修工具 >> Testing tools for car electrics
Car circuit tester 12905 for car electrics 6-12 volt and 24 volt, with pointed probe, cover cap, connecting lead with alligator clip.
Automotive voltage tester (complete set) 7756 Testing unit for electric and electronic car components, 3 - 48 volt, 2 LEDs to indicate voltage and plus or minus pole, complete in Pc-bag.Content:1 basic unit with 1.5 m cable, testing tip, ... more
Crocodile terminal 7755
特殊汽修工具 >> Special Tools for Carburettors
Screwdriver 10503 for adjusting slotted screws, matt chrome, black tip.
Screwdriver 10506 for setting correct CO-valve on mixture screen, idling mixture on Pierburg carburettors:BMW, Ford, Opel, Peugeot, Renault, Mercedes-Benz cars. Choke adjustment Audi 80, VW Passat 1.3-1.5; 1.6 l, matt ... more
Screwdriver 10507KK for hexagon socket head screws,size 3 mm,for mixture regulation on distributorof K-Jetronic: VW-Audi, Mercedes-Benz, Porsche 924, Ford and BMW, matt chrome, black tip.
Screwdriver 10518 for adjustment (slotted screws),matt chrome, black tip.
Jet reamers 11085 16 pieces in case, with holder
Bit holder with inside hexagon 12504 for all screwdriver bits, flexible shaft, for adjustment.
特殊汽修工具 >> Special Tools for Valves and Pistons
Valve seating-ring pliers 11063 for pulling valve stem seals and removal of valve spring base on VW-Audi engines with overhead camshaft i.e. Golf, Passat, Audi 80, Audi 100, BMW and Mercedes-Benz 190 D, bright nickel-plated.
Valve seating-ring pliers 11063/1 for extracting poorly accessible valve shaft seals, e.g. in four-valve engines.Joint and jaws made of gun-finished hardened sheet steel.Handles made of nickel-plated shaped sheet steel.
Valve spring lifter 11066 bright nickel-plated.
Spare jaws 11066R for No 11066, 2 each, hardened, nickel-plated.
Piston ring pliers 11069 for mounting and removing piston rings, bright nickel-plated.
Precision feeler gauges 11095-11097 DIN 1544F, nickel-plated case, tapered blades.
Valve spring tool 12108 incorporating 2 clamping and2 compression facilities which are interchangeable, suitable for most car engines, some without removing cylinder head.
Motor mechanics stethoscope 12705 steel probe, plastic handle and sound tubes.
Valve grinding tools 12731 with suction cap.
Valve clearance disc pliers 12956* for use with valve adjustment tools No 12960-12963.Reinforced tips with milled profile for better grip on discs.Pressed steel handles, bright nickel-plated.Hardened jaw tips.
Adjustment tools 12960-12963* for use with No 12956,for depressing bucket tappets, steel handle, plastic dip coated.Contact area hardened sheet steel.
特殊汽修工具 >> Car Body Repair Tools and Pullers
No Picture Body tool set 5010N 38 pieces
Panel beating set 10980 7 pieces, in steel case.
Panel beating set 10998 17 pieces, in steel case No 83/09.
Dinging hammer 10775
Special planishing hammer 10776 large extra thin faces,square face chequered.
Planishing hammer 10780 short.
Planishing hammer 10785 short, round face chequered.
Pecking hammer 10790 with round face and ball pein.
Pecking hammer 10795 with round face and acornshaped pein.
Pecking hammer 10800 short, round flat faceand pointed pein.
Pecking hammer 10805 round flat face,oblong, thin pein,approx. 1 mm thick.
Pecking hammer 10806 extra large thin faceand pein.
Planishing and grooving hammer 10811
Planishing and grooving hammer 10812
Dolly 10830
Special wedge dolly 10831
Planishing anvil 10832
Wedge dolly 10835
Anvil dolly 10838
Special anvil dolly 10840
Thin dolly 10841
Diabolo dolly 10842
Heavy duty dolly 10843
Toe dolly 10845
Anvil block 10850 axe shape.
Universal anvil dolly 10855
Toe dolly 10861 chequered surface.
Heel dolly 10865
Dolly 10866 with three flat and threeshaped faces.
Bumping spoon 10880
Bumping spoon 10885
Body spoon 10890
Body spoon 10895
Flange tool 10900 with leather cap.
Beechwood sticks 10925 for soldering, 5 pieces.
Pry bar 11005 head and point polished.
Lever bar 11006 special steel, bright nickel-plated.
Lever bar 11007 special steel, bright nickel-plated.
Body file 12724 Special Chrome Alloy Steel,crosscut, coarse, 14 t.p.i.
Body file 12725 Special Chrome Alloy Steel,crosscut, smooth, 18 t.p.i.
Body file 12726 Special Chrome Alloy Steel,crosscut, coarse, 14 t.p.i.
Box file 12747* also for body sheet work.
Body file holder 10905 with coarse blade.
Body file holder 10923 wooden, for flat blades.
Spare blades for No 10905 and No 10923 ID5702
Body file holder 10922 wooden, for half round radiusfile blades.
File blades for No 10922 ID5708
特殊汽修工具 >> Tin Snip Tools
Tin snips 12752 lever action, spring-assistedfor self-opening action.Heavy duty cutting:sheet steel up to 1.8 mmor stainless steel sheetup to 1.2 mm.
Tin snips 12753 lever action, spring-assistedfor self-opening action.Heavy duty cutting:sheet steel sheetup to 1.8 mmor stainless steel sheet up to 1.2 mm.
Nibbler shear 12951 for sheet metal up to 1.2 mmthickness, aluminium, copper,plastic, PCB' s up to 2 mm thickness. Universal tool for circular or rectangular cut-outs.Clean, burr-free finish. Cuttingblade, matrix, ... more
No Picture Spare parts for No 12951 ID5716
Set-off pliers 10642 for offsetting sheet metaledges up to 1 mm thickness,ensuring shoulder free surface.Handles fitted with H.D. plastic sleeves.
Punch pliers 10643 for use on sheet metal up to 1 mm thickness (hole spot welding - MAGwelding technique). Use inconjunction with setoff pliersNo 10642.Handles fitted with H.D. plastic sleeves.
Spot weld milling cutter 12727 HSSE steel, for spot-weld removalon car body or sheet metal construction. Replaceable millingcutter size 10 mm. Cutting depthadjustment by set screw, avoidsdistortion damage to sheet metal.
Replacement milling cutter 12728
Spot weld drill ID5728 for clean, burr-free removal ofspot-weld. Self-cutting centre pointavoids running off spot weld.Can be reground.
特殊汽修工具 >> Tools for vehicle doors
Door spring pliers 10652 for use on door andwindow springs on VW, OPEL,FORD, BMW etc.
Hinge pin removal tool 12719*
Drive pins ID5732 for hinge pin removal toolNo 12719
Universal alignment tool for automobile doors 12769 Scope of application:Almost all car and van doors, boot lids and hatchback doors.The application for this tool is door locks and door guide pins.Also suitable on door lock shackles, i.e. as on Opel ... more
Lever bar 12770 powder coated for improvedslide effect,for removal of doors trimsin cars.
Lever bar 12770/2 for levering off fragile caps, decorative trim (strips and rings), switches, rubber or fabric trim without damaging them. Finely honed, rounded edges ensure the vehicle paintwork and surrounding ... more
Plastic lever bar 12770/3 for removing trim and rubbing strips of all kinds on bodywork and around windscreens, rear and side windows. The broad area of contact prevents damage such as scratching of painted surfaces, ... more
特殊汽修工具 >> Tools for fitting/removing vehicle glass
Windscreen replacement setVERITRAC 10350N 1 guide handle1 draw handle1 coil cutting wire (50 m)2 double suction lifters
Windscreen removal setVERITRAC 10351N as 10350N, but withoutdouble suction lifters.
Two double suction lifters 10352 Suction cap dia. 120 mm,mechanical action with safety lock.Special ABS - plastic, oil andacid resistant.With belt slots in the handles.Carrying capacity 60 kg.
Double suction lifter 10352/1 as above.
Draw handle 10351/1 for drawing cutting wire throughadhesive seal.
Guide handle 10351/2 for fixing and clampingcutting wire inside vehicle.
Guide handle 10351/3 for fixing and clampingcutting wire inside vehicle.Extra long extension makesit especially suited to recessed glass.
Spare cutting wire SD10351N special alloy steel 0.6 x 0.6 mm.Easy wire removal without the rest unrolling.
Tension strap with ratchet 10354 for clamping and fixing freshlyfitted vehicle glass,synthetic webbing.
Wire insert probe 10355 for threading cutting wirethrough hardened adhesive,2.5 mm steel tubingwith brass handle.
Wire insert awl 1474/2 for feeding or pullingcutting wire through hardenedadhesive.
Flat scraper 12718 for removing residuesof sealant and adhesive.
Scraper 10356 for removing residues ofadhesive and stickers from vehicle glass. Blade 40 mmwide, 0.3 mm thick,interchangeable with cover.
Spare blades 10356R 10 pieces Dispenser.
Scraper with reversibletungsten steel blade 12749 for removing residues ofadhesive and stickers from vehicle glass. Can also beused for scraping metal andseals. Includes angled inner hex. screwdriver.
No Picture Spare blade 12749R to scraper No 12749.
特殊汽修工具 >> Special tools for brakes and wheels
Torque wrench set 721/15/5 for wheel assembly on automobiles.
ES 721/15/4/2 ES 721/15/4/2 530 x 350 x 40 mm, 7 pieces
No Picture Empty inlay ID11800
Wheel braces ID5761 DIN 3119/ISO 6788, forged centre section, pressed-in extension arms with extra deep forged socket heads, Chrome Alloy Steel, chrome plated.
Wheel braces ID5767 green hammer paint finish.
Tyre levers ID5769 Handy, sturdy construction, purposefully shaped, Chrome Alloy Steel, chrome plated.
Wheel nut socket 2309K with plastic sleeve.Sleeve extension protects not only wheel bolts and nuts but also the wheel and holes.
Balance weight pliers 10599/2 registered design, with cutter for cutting and trimming lead weights (with or without adhesive foil), Chrome Vanadium, chrome plated.
Brake spring pliers 10613 for rivetted brake linings/shoes, Chrome Vanadium, bright nickel-plated.
Brake spring pliers 10613/1 with flexible anvil, for rivetted and glued brake linings/shoes.
Brake spring pliers 10613/2 for fitting and removing the retaining springs on drum-brake pads, e.g. DaimlerChrysler, Type 168, A Class, Renault Clio and Twingo from August 2002.
Brake caliper file 12371 for removing dust, rust and dirt from brake caliper groove.
Steel wire brush 12373 special slim design.
Steel wire brush 12373/1 registered design, particularly suited to use on tight brake disc areas,thanks to the slim design. The soft and wavy brassbristles enable the components to be cleanedwithout damaging the material. ... more
No Picture Brake disc gauge 12900/2N DIN 862, for measuring the thickness of car and motorcycle brake discs in situ, stainless steel, with locking screw and trailing vernier scale (1/10 mm), in leather pouch.
Air filter claw 1068 for loosening of filter cartridges on air brakes (trucks).
特殊汽修工具 >> Sockets 1/2"
Socket 51S extra deep, DIN 3124/ISO 2725-1, E DIN EN 3710,E DIN EN 3709 (test loads), HPQ high performance steel, chrome plated.
特殊汽修工具 >> IMPACT sockets 1/2"
IMPACT sockets 50IMP* for wheel nuts, bored out to accept bolt protrusion and dome nuts etc., 1/2" Inside Square -drive, DIN 3129/ISO 2725-2, for power drivers,Chrome Alloy Steel, gunmetal finish.
IMPACT sockets 2309 1/2" Inside Square -drive, for power drivers, extra deep, with reduced outside diameter, Chrome Alloy Steel, gunmetal finish.
特殊汽修工具 >> IMPACT sockets 3/4"
IMPACT sockets 2509 3/4" Inside Square -drive, for power drivers, extra deep, with reduced diameter,Chrome Alloy Steel, gunmetal finish.
特殊汽修工具 >> IMPACT-Sockets 1"
IMPACT sockets 2609 1" Inside Square -drive, for power drivers, extra deep, with reduced outside diameter, Chrome Alloy Steel, gunmetal finish.
特殊汽修工具 >> Special Tools for oil service
Oil filter claw 1015 for loosening of oil filters on cars.
Special socket 3045 for oil filters, size 74 mm, 14-point, 10 mm dia. bore and outside hexagon 22 mm Ø.
Special socket 3045K for oil filters, size 74 mm, 14-point, 10 mm dia. bore and outside hexagon 22 mm Ø, extremely compact - essential where access is awkward.
Special socket 3046 for fitting and removing oil filter covers when changing oil filter cartridges
Special socket 3048 for oil filters, size 92 mm, 15-point, outside hexagon size 27 mm.
Strap wrench 12005 for oil filters etc., up to 140 mm diameter.
Oil filter wrenches 12007 adjustable for diameters80 - 110 mm.Hardened anti-slip cams ensure safety during use.
特殊汽修工具 >> Special Tools for Engine and Gear Transmission
Clutch alignment tool 12735 8-piece set, contains 1 clutch alignment mandrel, length 220 mm;1 combined sliding taper/cylindrical bush, cylindrical bushes from22.2 - 25.2 mm; 1 sliding cylindrical bush, tapered at both ends, ... more
特殊汽修工具 >> Special tools for cars
Chain exhaust-pipe cutter 157 infinitely adjustable, with twist handle, also suitable for special steel pipes up to 1.8 mm wall thickness,chain length 270 mm.
No Picture Chain K157
Special extension 1225 curved, for use on magnetic switch diesel pump.
Universal bracing tool for pulleys 1026/3 registered design, for virtually all belt cross-sections, supplied without belts.
Hose clip pliers 10614 for self tightening hose clips,nickel-plated.
Hose clip pliers CLIC 10615/1 for CLIC hose clipse.g. Volkswagen, Audi, Opel, Peugeot, BMW, Alfa Romeo. Work can be carried out at various angles due to stepless swivellingjaws.
Hose clip pliers 10623/1 registered design, with rotating jaws and multiple locking positions, single-handed use even with wide openings due to variable-geometry joint, especially for 12 and 15 mm wide, large-format hose ... more
Hose clip pliers 10623/2 registered design, with Bowden cable and multiple locking positions, especially for 12 and 15 mm spring-steel hose clips, suitable for use near cooling and heating systems up to a diameter of 42 mm, ... more
Ear clamp pincers 10625 for application of 1 and 2-ear clamps on shaft sleeves, radiator and fuel lines e.g. for BMW, DaimlerChrysler, Ford, GM, Honda, Mazda, Nissan, Opel, VW/Audi, quality steel, black paint finish.
Hose clip pliers 10625/2 for correctly closing hose clips without ears, for shaft sleeves on VW/Audi, DaimlerChrysler and Toyota. Quality steel, nickel-plated, jaws gunmetal finished.
Spring pretensioner 12625 for fitting and removing McPherson strut systems.Consists of:1 basic tool (max. compression force 22,500 N)2 spring holders Diameter in mm 80 - 145 mm2 spring holders Diameter in mm 145 - 195 ... more
Spring holder 12625F 1 piece
Protective jaw-covers 12625S with magnets
Flat scraper 12718 special steel, for removal of gasket seals on carburettor, valve cover, cylinder head etc.
Pull hook for rubber exhaust mountings 12763 for pulling rubber loops on exhaust mountings. All cars except Ford.
Extractor pliers 12771 for removing fixing plugs on door trims, outside trims, rubber bumper covers etc.Joint and jaws made of hardened sheet steel, handles made of shaped sheet steel.
Fuel hose clamp 12975 capacity up to Ø
特殊汽修工具 >> BMW
No Picture Tool set for BMW 2500/3 208 tools
Workshop set for BMW vehicles 2500 TCS 281 tools, in TCS inlays ,7x1/3, 1x2/3 and 4x3/3 inlays for 7 drawers.
Workshop set for BMW motorbikes 2501 TCS 209 tools, in TCS inlays ,2x1/3, 2x2/3 and 5x3/3 inlays for 7 drawers.
Screwdriver Bit 54TX-T20 for inside TORX® screws, size T20,1/2" Inside Square -drive, use on mounting screws for choke-switch on choke-flap - L-Jetronic.
CROW-FOOT spanner 540-22 size 22 mm, 3/8" Inside Square -drive, on through-flow jet of 2B4-carburettor, for use with adaptor No 513.
Adaptor 513 1/2" socket x 3/8" plug.
Socket 1062 bi-hexagon, AS drive, size 27 mm, 1/2" Inside Square -drive,for diesel injectors.
Screwdriver 10507KK for hexagon socket head screws, size 3 mm, length 380 mm,for mixture regulation on distributor of K-Jetronic.
Screwdriver 10518 length 520 mm, blade 1.0 x 5.5 x 410 mm, for adjustment work.
Ring insert tool 732/10-10 size 10 mm, valve adjustment, tightening torque 8 - 12 N m.
Socket 1067* for external TORX® screws, with screw clamping spring, size E 12,length 140 mm, 1/2" Inside Square -drive, for cylinder head bolts.
Valve sealing ring pliers 11063 for valve stem sealson all engines.
Socket 40TX-E8 for external TORX® screws, size E 8, 1/4" Inside Square -drive,for steering lock screws.
OPEN-RING spanner 24-17x19 bi-hexagon, size 17 x 19 mm, use on wingpump manifold(hydro-steering).
Socket 55-36 hexagon, size 36 mm, 3/4" Inside Square -drive, use on vibration damper.
CROW-FOOT spanner 540-22 size 22 mm, 3/8" Inside Square -drive, use on track-rods
Adaptor 513 1/2" socket x 3/8" plug.
BIT 1417 for inside TORX® screws, size T25; 1/4" Outside Hexagon -drive,for screws on sun roof E30.
Socket 46-12 extra deep, bi-hexagon, size 12 mm, 3/8" Inside Square -drive,use on glow plugs of diesel engines.
Spark plug socket 4660-16 5/8 extra deep, hexagon size 16 mm - 5/8" with magnet,outside hexagon, size 19 mm, 3/8" Inside Square -drive.
INHEX socket 54-7 for hexagon socket head screws, size 7 mm, 1/2" Inside Square -drive,for changing brake linings.
OPEN-RING insert tool 733/10-12 size 12 mm, for flare nuts on brake pressure regulator,tightening torque 15 - 18 N m.
No Picture OPEN-RING insert tool 733/10-14 size 14 mm, for flare nuts on main brake cylinder,tightening torque 16 - 25 N m.
No Picture OPEN-RING insert tool 733/10-17 size 17 mm, for flare nuts on main brake cylinder,tightening torque 16 - 25 N m.
No Picture OPEN-RING insert tool 733/10-19 size 19 mm, for flare nuts on main brake regulator,tightening torque 30-40 N m.
Socket 50TX-E10 for external TORX® screws, size E10, 1/2" Inside Square -drive, use on mounting screws for GETRAG 260 gearbox, as well as on automatic gearboxes fitted to US and Japanese models.
No Picture Socket 50TX-E12 size E12
No Picture Socket 50TX-E14 size E14
Screwdriver BIT 54TX-T27 for inside TORX® screws, size T27, 1/2" Inside Square -drive, use on switchgear of automatic gearbox 3HP 22, 4HP 22.
BIT 1418 for inside TORX® screws, size T27, 1/4" E-drive, use on switchgear on automatic gearbox 3HP 22, 4HP 22.
SERVICE-MANOSKOPtorque wrench 730/5 6-50 N m, with tool carrier for insert tools, for tighteningZF switch-gear and adjustment brake belt BW 65 on automatic gearbox, to use with ratchet insert tool No 735/10.
Ratchet insert tool 735/10 reversible, 1/2" Inside Square -drive.
Special circlip pliers 6547 use on retaining ring on gearbox main shaft (all "GETRAG" andZF gear-boxes S4-18/3).
Chain pipe cutter 157 infinitely adjustable, with twist handle, for special steelpipes up to 1.8 mm wall thickness.
BIT 1445 for inside TORX® tamper resistant screws, size T30, 1/4" Outside Hexagon -drive, use on sensor screws wheelhouse (models with airbag system).
Hexagon nut spinner 12506-6 flexible, size 6 mm, for screws on hose clips of radiator hose,max. tightening torque 8 N m.
Fuel hose clamp 12975 capacity up to Ø 20 mm, for stopping fuel flow temporarily.
特殊汽修工具 >> Citroen
Special ring spanner 1023* single ended, angled, size 13 mm, use on mounting screwsof injection pump.
特殊汽修工具 >> Renault
Tubular spark plug spanner 1043 extra long, with rubber insert, for deeply recessed, difficult-to-reach spark-plugs with M12 x 1.25 mm threads.
No Picture Tool set for Renault 2003 73 tools
Tubular spark plug spanner 1043 extra long, with rubber insert, for deeply recessed, difficult-to-reach spark-plugs with M12 x 1.25 mm threads.
Special combination spanner 1003* bent, o/e size 10 mm, ring-bi-square, size 10 mm, for brake adjustment.
Oil service spanner 1041 size 8 mm plug, size 10 mm bi-square socket, for engine oil drain plug and gearbox.
Socket 1056-8 plug size 8 mm square, 1/2" Inside Square -drive, for engine oil drain plug.
Socket 1056-10* size 10 mm
特殊汽修工具 >> Daihatsu
Brake adjusting lever 1029* for drum brakes.
特殊汽修工具 >> DaimlerChrysler Pkw
Tool set for DaimlerChrysler cars 3026/1TCS 272 tools, in TCS inlay ,5x1/3, 5x2/3 and 3x3/3 inlays for 8 drawers.
Socket 51-27 DC No 001 589 65 09 00extra deep, bi-hexagon, size 27 mm, 1/2" Inside Square -drive, for injection nozzles on diesel car engines.
No Picture Socket 51-30 DC No 000 589 75 09 00size 30 mm, for injectors.
Socket 3000 DC No 604 589 01 09 00multi-spline, 1.5 x 58 mm, 1/2" Inside Square -drive, for use on pre-chamberwith indirect injection.
Special extension 3505
No Picture Special CROW-FOOT spanner 3540-14* size 14 mm.
Screwdriver 10506 DC No 123 589 00 11 00length 350 mm, blade 4 x 0,8 mm, for setting correct CO-valueon mixture regulating screws.
Universal joint INHEX socket 3149-8* DC No 117 589 01 07 00for hexagon socket head screws, size 8 mm, length 300 mm, 3/8" Inside Square -drive, for cylinder head bolts.
INHEX socket 3054-8G DC No 000 589 34 07 00for hexagon socket head screws, size 8 mm, length 105 mm, cranked,1/2" Inside Square -drive, for cylinder head bolts.
INHEX socket 3054-8L* DC No 000 589 33 07 00for hexagon socket head screws, size 8 mm, length 130 mm, 1/2" Inside Square -drive, for cylinder head bolts.
INHEX socket 1054-10 DC No 000 589 05 07 00for hexagon socket head screws, size 10 mm, length 140 mm,1/2" Inside Square -drive, for cylinder head bolts.
Screwdriver BIT 3054X-M10 DC No 601 589 00 10 00for tri-square socket head screws (XZN),size M10, length 140 mm, 1/2" Inside Square -drive, for cylinder head bolts and drive shaft bolts.
Screwdriver BIT 3054X-M12 DC No 617 589 00 10 00size M 12, for cylinder head bolts,with tri-square socket head M 12.
Screwdriver BIT 3004 DC No 119 589 00 10 00for tri-square socket head screws (XZN), size M10, length 140 mm,1/2" Inside Square -drive, for cylinder head bolts.
Special CROW-FOOT spanner 3545-17 DC No 116 589 02 01 00size 17 mm, for valve adjustment.
SERVICE-MANOSKOPtorque wrench 730R/5DC DC No 001 589 72 21 006-50 N m, 3/8" Outside Square -drive, for valve adjustment.
SERVICE-MANOSKOPtorque wrench 730R/12DC DC No 001 589 72 21 0025-130 N m, 1/2" Outside Square -drive, for valve adjustment.
Valve sealing ring pliers 11063 DC No 000 589 53 37 00for removal of valve stem seals.
Piston ring compressor 11068-1 DC No 000 589 04 14 00made of spring steel, stepless adjustment, capacity 57-125 mm, height 80 mm, for compressing piston rings Ø 60-125 mm.
Piston ring pliers 11069-1 DC No 000 589 51 37 00for piston rings, 50-100 mm, length 200 mm,for mounting piston rings.
Screwdriver BIT 3054X-M10 DC No 601 589 00 10 00for tri-square socket head screws (XZN),size M10, on drive shaft bolts.
Special torque wrench 73 Nm/04 + WKS DC No 123 589 02 21 00capacity 0-400 cN m, 1/2" Outside Square -drive, for steering adjustmentand friction check.
Special o/e insert tool 3731/40-46 DC No 126 589 00 01 00use with SERVICE-MANOSKOP torque wrench No 730/12DC and 730/20DC, for 3-part drive shaft.
TORSIOMETER torque screwdriver 760/60/410 DC No 001 589 80 21 00capacity 120-600 cN m, c/w adaptor, complete with No 3116/1 andNo 410, with works calibration certificate, for adjustment on servo steering and taper roller.
No Picture TORSIOMETERtorque screwdriver 760/7,5-3116/1 DC No 001 589 81 21 0015-75 cN m, complete with No 3116/1,for friction measurement on steering gear.
Internal puller 11060-4 DC No 000 589 28 33 00capacity 28-37 mm, for taper roller bearing outer ring on steering housing, to be used with counter stay No 11061-2.
No Picture Counter stay with reduction unit 11061-2 DC No 000 589 34 33 00for taper roller bearing outer ring on steering housing.
Tool set in roll-up bag 3028 for car electricsContent:13 small double open ended spanners ELECTRIC No 12, sizes 3.5; 4; 4,5; 5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm,10 sockets No 40, sizes 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11 mm,1 ... more
Spark plug socket 3762 DC No 102 589 01 09 00with torque limiter, size 16 mm - 5/8", 3/8" Inside Square -drive.
Brake bleeding spanner 3006 DC No 140 589 03 09 00size 9 mm, length 110 mm, with swivel handle (length 140 mm)and acid proof, transparent plastic hose with adaptor, for use on car brake systems, without removal of wheels.
OPEN RING insert tool 733/10-11 DC No 000 589 75 03 00size 11 mm, use withSERVICE-MANOSKOP torque wrench No 730/5, for flare nuts on brake lines and bleed screws.
No Picture OPEN RING insert tool 733/10-14 DC No 000 589 76 03 00size 14 mm, use withSERVICE-MANOSKOP torque wrench No 730/5, for flare nuts on brake lines and bleed screws.
Brake caliper brush 12373 DC No 000 589 26 68 00extra narrow, for cleaning brake calipers without damage to dust gasket or corrosion protection coating.
INHEX socket 54-14 DC No 001 589 61 09 10for hexagon socket head screws, size 14 mm, 1/2" Inside Square -drive, for use on oil drain plug.
Socket 3045 DC No 103 589 00 09 00special 14 point, size 74 mm, with outside hexagon size 22 mmand 10 mm dia. bore, for damage free fitting of oil filter or oil filter cartridge.
Oil plug spanner 3676* DC No 117 589 02 07 00size 14 x 13 mm, with 13 mm inside hexagon and 14 mm outside hexagon, for use on oil plug.
Oil plug spanner 3677* DC No 000 589 24 07 00size 14 x 17 mm, with 17 mm inside hexagon and 14 mm outside hexagon, for use on oil plug.
INHEX socket 3049-8 DC No 103 589 01 09 00for hexagon socket head screws, size 8 mm, length 24 mm, 3/8" Inside Square -drive, for use on mounting screws on fluid fly-wheel.
Socket 51-27 DC No 001 589 65 09 00extra deep, bi-hexagon, size 27 mm, 1/2" Inside Square -drive, for rotating engine through hexagon on crankshaft.
INHEX socket 3054-8G DC No 000 589 34 07 00for hexagon socket head screws, size 8 mm, length 105 mm, 1/2" Inside Square -drive, for bolts on car engines.
INHEX socket 1054-10 DC No 000 589 05 07 00for hexagon socket head screws, size 10 mm, length 140 mm,1/2" Inside Square -drive for bolts on car engines.
T-handled INHEX key 1009DC DC No 117 589 05 07 00size 10 mm a/f (with interchangeable INHEX bits), lengths 500 mm, blade 61 mm, consisting of: 1 T-handle, 2 INHEX bits, for tensioning vee-belt on crankshaft and for ... more
Internal puller 11060-1a DC No 000 589 25 33 00capacity 14-19 mm, for sealing ring and bearing on crankshaft, use with counter stay No 11061-1
No Picture Counter stay 11061-1 DC No 000 589 33 33 00
Internal puller 11060-2 DC No 000 589 26 33 00capacity 18-23 mm, for bearing bush of idler gear on oil pump drive, use with counter stay No 11061-2
No Picture Counter stay 11061-2
CROW-RING spanner 440-17DC DC No 000 589 69 03 00size 17 mm, 3/8" Inside Square -drive, for use on pipes for air conditioning unit.
No Picture CROW-RING spanner 440-19DC DC No 000 589 70 03 00size 19 mm.
No Picture CROW-RING spanner 440-22DC DC No 000 589 71 03 00size 22 mm.
No Picture CROW-RING spanner 440-24DC DC No 000 589 72 03 00size 24 mm.
Ratchet insert tool 735/20DC DC No 000 589 10 99 32reversible, 1/2" Outside Square -drive, use with SERVICE-MANOSKOP torque wrenchNo 730/12DC and 730/20DC, for general service work.
SERVICE-MANOSKOPtorque wrench 730R/5DC DC No 001 589 72 21 00capacity 6-50 N m, 3/8" Outside Square -drive, for general service work.
SERVICE-MANOSKOPtorque wrench 730R/12DC DC No 001 589 66 21 0025-130 N m, 1/2" Outside Square -drive
SERVICE-MANOSKOPtorque wrench 730R/20DC DC No 001 589 67 21 0040-200 N m, 1/2" Outside Square -drive.
Internal puller 11060-1 DC No 000 589 25 33 00capacity 12-16 mm, for use on bearings, seals and bushes.
No Picture Internal puller 11060-2 DC No 000 589 26 33 00capacity 18-23 mm.
No Picture Internal puller 11060-3 DC No 000 589 27 33 00capacity 20-30 mm.
No Picture Internal puller 11060-4 DC No 000 589 28 33 00capacity 28-40 mm.
No Picture Internal puller 11060-5 DC No 000 589 29 33 00capacity 36-46 mm.
No Picture Internal puller 11060-6 DC No 000 589 30 33 00capacity 46-58 mm.
No Picture Counter stay 11061-1 DC No 000 589 33 33 00for Internal Puller No 11060/0-3, for use on bearings, seals and bushes.
No Picture Counter stay 11061-2 DC No 000 589 34 33 00for internal puller No 11060/4-7.
Hexagon nut spinner 12506-7 DC No 123 589 12 09 00flexible, size 7 mm, for screws on hose clips of radiator hose, max. tightening torque 8 N m.
Fuel hose clamp 12975 DC No 000 589 40 37 00capacity up to Diameter in mm 20 mm, for stopping fuel flow temporarily.
STAHLWILLE >> Special automotive tools >> DaimlerChrysler Lkw
Tool set for DaimlerChrysler HGVs 3022/1TCS 299 tools, in TCS inlay ,6x1/3, 3x2/3 and 6x3/3 inlays for 10 drawers.
OPEN-RING spanner 24-17x19 DC No 000 589 07 03 00bi-hexagon, size 17 x 19 mm,for all threaded connectors on injector pipes.
Socket 51-30 DC No 000 589 75 09 00extra deep, bi-hexagon, size 30 mm, 1/2" Inside Square -drive, on injector post.
CROW-RING spanner 440-27DC DC No 000 589 78 03 00for setting of electronic injection on 440-HP-engines.
Socket 1051-22* DC No 001 589 79 09 00bi hexagon, AS-drive, size 22 mm, 1/2" Inside Square -drive, for fuel, oil and coolant temperature sensor.
4-pin socket 3678 DC No 403 589 04 07 00length 72 mm, 1/2" Inside Square -drive, for use on pressure nut of injector post.
INHEX sockets 3054-8L* DC No 001 589 61 09 07for hexagon socket head screws, size 8 mm, length 130 mm, 1/2" Inside Square -drive, for cylinder head bolts.
INHEX sockets 1054-10 DC No 000 589 05 07 00for hexagon socket head screws, size 10 mm, length 140 mm, 1/2" Inside Square -drive, for cylinder head bolts.
Screwdriver BIT 3054X-M12 DC No 617 589 00 10 00for tri-square socket head screws (XZN), size 12, length 140 mm,Ø 11.5 mm, 1/2" Inside Square -drive for cylinder head bolts with tri-squaresocket head M 12.
Piston ring compressor 11068-2 DC No 000 589 38 31 00of special spring steel, infinitely variable adjustment,c/w adj. spanner, capacity Ø 90-175 mm.
Socket 55-30 DC No 303 589 06 09 00size 30 mm, hexagon 3/4" Inside Square -drive, for U-bolt nuts, front.
No Picture Socket 55-36 DC No 303 589 07 09 00size 36 mm, for U-bolt nuts, rear.
Striking ring spanner 8-46 DC No 001 589 43 09 01size 46 mm, drive tool for socket No 61, size 46 mm, for nut on drive shaft bearing.
No Picture Striking ring spanner 8-65 DC No 001 589 22 09 01size 65 mm, drive tool for socket No 61, size 65 mm, for nut on drive shaft pinion.
Striking socket 61-46* DC No 001 589 43 09 02size 46 mm, equal inside and outside hexagon dimensions, 1" Inside Square -drive,for nut on drive shaft bearing.
No Picture Striking socket 61-65* DC No 001 589 22 09 02size 65 mm, for nut on drive shaft pinion.
Special set 3570 DC No 001 589 72 09 00Content:1 Socket, bi-hexagon, No 3060,size 65 mm, 1" Inside Square -drive1 extension No 559/4, 1 adaptor No 569,3/4" socket 1" plug,for rear axle.
TORSIOMETER-torque screwdriver 760/60/410 DC No 001 589 80 21 00capacity 120-600 cN m c/w Adaptor No 410, 1/4" - socket 1/2" plug, with works calibration certificate, complete with No 3116/1, for adjustment on servo steering and ... more
SERVICE-MANOSKOPtorque wrench 730R/401/2" DC SpecialDC No 000 589 10 99 0180-400 N m, 1/2" Outside Square -drive, for general service work.Attention:maximum permissible load for Ratchet attachment 1/2" Outside Square -drive= 300 N m.
Special o/e insert tool 3731/40-24 DC No 000 589 10 99 21size 24 mm, use with SERVICE-MANOSKOP torque wrenchNo 730/40, for drive shaft.
Air filter claw 1068 DC No 655 589 00 61 00capacity 100-145 mm, total height 85 mm, length of claws 60 mm,1/2" Inside Square -drive for loosening of filter cartridges on air brakes (trucks).
Special ring spanner 3003* size 24 mm, 3/4" Inside Square -drive, use with SERVICE-MANOSKOP torque wrench No 730R/40 for use on central screw of compressor wheel.
Striking ring spanner 8-46 DC No 001 589 43 09 01size 46 mm, drive tool for socket No 61, size 46 mm, for screws on belt pulley, vibration damper.
No Picture Striking ring spanner 8-65 DC No 001 589 22 09 01size 65 mm, drive tool for socket No 61, size 65 mm.
Striking socket 61-46* DC No 001 589 43 09 02size 46 mm, equal inside and outside hexagon, 1" Inside Square -drive, for screws on belt pulley, vibration damper.
No Picture Striking socket 61-65* DC No 001 589 22 09 02size 65 mm.
OPEN-RING spanner 24-10x12 DC No 000 589 51 03 00hexagon, size 10 x 12 mm, for general service work.
CROW-RING spanner 440-30 DC No 425 581 00 66 00size 30 mm, 1/2" Inside Square -drive for use on hydraulic pipe flare nuts.
CROW-FOOT spanner 540-19DC DC No 000 589 27 01 00size 19 mm, for use on new push connector for pneumatic installations on new light-weight truck series.
No Picture CROW-FOOT spanner 540-24DC DC No 000 589 28 01 00size 24 mm.
SERVICE-MANOSKOPtorque wrench 730R/2DC DC No 001 589 75 21 00capacity 4-20 N m, 3/8" Outside Square -drive, for use on new push connector for pneumatic installations on new light-weight truck series.
Torque wrench set 730R/40/32 DC No 000 589 10 99 00 32 pieces, in steel case, for general service work.Content:1 SERVICE-MANOSKOP No 730/40, 80-400 N m,1 ratchet insert tool No 735/20, reversible, 1/2" Outside Square ... more
Set of INHEX sockets 54/12 DC No 001 589 61 09 00for hexagon socket head screws, in steel case, for general service work.Content:12 INHEX sockets No 54, sizes 4, 5, 6, 7, 8, 10, 12, 14, 17, 19 mm,No 3054/8, No 1054/10, ... more
Set of accessories 553/7K DC No 001 589 18 09 00in steel case, for general service work.Content: 1 adaptor 1/2" socket 3/4" plug No 514; 1 extension 200 mm No 559/8; 1 extension 400 mm No 559/16; 1 adaptor 3/4" ... more
Standard-MANOSKOPtorque wrench 721NF/80DC DC No 001 589 74 21 00capacity 160-800 N m, 3/4" Outside Square -drive, for general service work.
特殊汽修工具 >> DaimlerChrysler Unimog tools
No Picture Tool set for DaimlerChryslerUnimog 3025N 123 toolsDC No 000 589 12 99 00
No Picture Tool set No 3025N in tool box No 446/08 446/3025N
特殊汽修工具 >> Fiat
Set: Screwdriver sockets 54CV/9 for spline socket head screws (Ribe CV).for brakes and cylinders head bolts.Content: M5; M6; M7; M8; M9; M10; M12; M13; M14
Screwdriver sockets 54CV for spline socket head screws (Ribe CV), length 60 mm, 1/2" Inside Square -drive, for brakes and cylinder head bolts.
Piston ring compressor 11068-1 Fiat-No A 60 605made of special spring steel, stepless adjustment c/w hexagon key wrench, capacity: 57-125 mm, height 80 mm, for compressing piston rings.
Piston ring pliers 11069-1 Fiat-No A 60 182for piston rings Ø 50-100 mm, length 200 mm, for manipulating piston rings.
Valve adjusting tool 12962* for exchange of discs with valve clearance disc pliers No 12956.
Valve clearance disc pliers 12956* reinforced tips with milled profile for better grasp of disc, for exchange of discs.
Socket 46-19 Fiat-No A 57 052extra deep, bi-hexagon, size 19 mm, 3/8" Inside Square -drive, for front mounting screw of top steering link on front wheel suspension.
Hexagon key wrench 10765-12 Fiat-No A 5013long, for hexagon socket head screws, size 12 mm, for oil drain plug on engine, gearbox and rear axle.
INHEX socket 1054-13 for hexagon socket head screws, size 13 mm, length 70 mm, 1/2" Inside Square -drive, for oil drain plug on engine.
特殊汽修工具 >> Ford
No Picture Tool set for Ford 2011 77 tools
Special extension 3505
No Picture Special CROW-FOOT spanner 3540-19* size 19 mm.
Valve adjustment tool 12963* for exchange of discs, use with valve clearance disc pliers No 12956.
Valve clearance disc pliers 12956* reinforced tips with milled profile for better grasp of discs, for exchange of discs.
Oil service spanner 3045K size 74 mm, 14-point, with outside hexagon size 22 mm and 10 mm dia. bore, extremely compact (height 44 mm) for awkward places.
Oil service spanner 1056-10* outside square size 10 mm, length 36 mm, 1/2" Inside Square -drive, for drain plugs on sump, gearbox, differential.
Socket 50TX-E11 for external TORX® screws, size E11, 1/2" Inside Square -drive, for use on mounting screws of vibration damper on Ford gearbox MT 75.
特殊汽修工具 >> Honda
No Picture Tool set for Honda 2007 46 tools
特殊汽修工具 >> Mazda
No Picture Tool set for Mazda 2006 76 tools
Tubular spark plug spanner 1042 size 16 mm, length 270 mm, 3/8" Inside Square -drive.
IMPACT socket 51aIMP 13/16-20,8* extra deep, hexagon, for power drivers, size 20.8-13/16", 1/2" Inside Square -drive, for wheel nuts.
Socket 1056-10* outside square size 10 mm, length 36 mm, 1/2" Inside Square -drive, for oil filter- and drain plug on rear axle.
特殊汽修工具 >> Mitsubishi
No Picture Tool set for Mitsubishi 2009 78 tools
OPEN-RING spanner 24-14x17 XB 990716bi-hexagon size 14 x 17 mm, 17 mm for fuel pipes,14 mm for servo-assisted steering.
Socket 51-27 MD 998387long, bi-hexagon, size 27 mm, 1/2" Inside Square -drive, for injector nozzles (diesel, Colt, Lancer, L300,Galant, Turbo D), for nozzle carrier (Pajero 4-wheel-drive diesel 4D55).
Socket 1007* long, bi-hexagon, AS drive, relief-turned inside,size 22 mm, 1/2" Inside Square -drive, for diesel injector.
INHEX socket 1054-10 MD 998051for hexagon socket head screws,size 10 mm, length 140 mm,1/2" Inside Square -drive, for cylinder head bolts.
INHEX socket 3054-8 MD 998360for hexagon socket head screws, size 8 mm, length 80 mm,1/2" Inside Square -drive, for cylinder head bolts (motor 4G1, 4G3, L 300),for free wheel hub (Pajero).
OPEN-RING spanner 24-14x17 XB 990716bi-hexagon, size 14 x 17 mm,14 mm for servo-steering,17 mm for fuel pipes.
Screwdriver 4750-T40 MB 990826for inside TORX® screws,size T40, on steering column.
Ball joint separator 11041-3 MB 990809for steering rod.
Screwdriver BIT 54TX-T40 XB 900000for inside TORX® screws, size T40,1/2" Inside Square -drive, safety belt mountings.
特殊汽修工具 >> Nissan
No Picture Tool set for Nissan 2005 67 tools
Socket 1007* extra deep, bi-hexagon, AS-drive, relief-turned inside,size 22 mm, 1/2" Inside Square -drive, for diesel injector.
Special CROW-FOOT spanner 3545-17 made up from special extension No 3505 and special CROW-FOOTNo 3540, size 17 mm, 1/2" Inside Square -drive, for valve adjustment.
Socket 1056-8 outside square size 8 mm, length 36 mm, 1/2" Inside Square -drive, for drain plugs on sump, gearbox, differential.
特殊汽修工具 >> Opel
No Picture Tool set for OPEL 2002 96 tools
Socket 1051-19* bi-hexagon, AS-drive, size 19 mm, 1/2" Inside Square -drive, for use on Gear Box mounted Reversing Light Switch.
Brake adjustment lever 1029* for rear wheel brake shoes.
特殊汽修工具 >> Peugeot
No Picture Tool set for Peugeot 2004 66 tools
Tubular spark plug spanner 1043 extra long, with rubber insert, for deeply recessed, difficult-to-reach spark-plugs with M12 x 1.25 mm threads.
Lubrication service spanner 1041 size 8 mm outside square and size 10 mm inside bi-square, length 235 mm, for drain plugs on sump, gearbox, differential.
Socket 1056-8 outside square size 8 mm, length 36 mm, 1/2" Inside Square -drive, for drain plugs on sump, gearbox, differential.
Socket 1056-10* size 10 mm.
Oil service spanner 1058 bent, size 8 and 10 mm outside square, for drain plugs on sump,gearbox, differential.
特殊汽修工具 >> Porsche
Tool set for Porsche 1100TCS 229 tools, in TCS inlays ,1x1/3, 1x2/3 and 5x3/3 inlays for 6 drawers.
特殊汽修工具 >> Toyota
No Picture Tool set for Toyota 2008 97 tools
特殊汽修工具 >> VW/Audi
No Picture Tool set for Volkswagen 1000N 93 tools
No Picture Body tool set for Volkswagen 1020N 56 tools
Socket 1007* long, bi-hexagon, AS-drive, relief-turned inside, size 22 mm, 1/2" Inside Square -drive, for diesel injector
INHEX socket 1054-13 for hexagon socket head screws, size 13 mm, length, 70 mm, 1/2" Inside Square -drive, for use on brass air-cooled injector nozzles.
Single ended spanner 1023* size 13 mm, for mounting screws on injection pump, adjusting injector timing, changing, toothed belt on 1.6 l 4-cylinder diesel.
Valve sealing ring pliers 11063 for removing valve stem seals on water cooled engines.
Valve spring mounting tool 12108 length 300 mm.
Valve adjustment tool 12960* for use with clearance disc pliers No 12956,on all 4-cylinder engines with bucket tappets until model year 1982.
Valve clearance disc pliers 12956* reinforced tips with milled profile for better grasp of discs, for exchange of discs.
Socket 1051-19* bi-hexagon, AS-drive, size 19 mm, 1/2" Inside Square -drive, for use on frontsuspension.
No Picture Socket 1051-21* size 21 mm.
No Picture Socket 1051-22* size 22 mm.
Hexagon key wrench 10765-7 size 7 mm (for use with No 1051-19, No 1051-22), for use as counter stay on front suspension.
Brass punch 12495 Ø 20 mm, length 200 mm, for use on bushes bearing rings, steering pivot pin.
Spark plug socket 1040* hexagon, with rubber insert, size 20.8 mm-13/16", 1/2" Inside Square -drive
Tubular spark plug spanner 1042 size 16 mm, length 270 mm, 3/8" Inside Square -drive.
Brake adjusting lever 1029* for drum brakes.
INHEX socket 1054KK-5 with ball-point hexagon, size 5 mm, length 238 mm, 1/2" Inside Square -drive,for use on socket head screws with difficult access up to an angle of 25°, size 5 mm for use on sump screws of 5 ... more
INHEX socket 1054KK-8 size 8 mm, length 238 mm.
Accessory set for SERVICE-MANOSKOP No 730/2 1060/4 for controlled torque tightening of screws on automatic transmission.Content:No 736/10 Bit-holder insert tool with 5/16" inside hexagon,No 1322 Bit for hexagon socket head screws, size 5 mm,No ... more
SERVICE-MANOSKOPtorque wrench 730/2 capacity 4-20 N m.
Square drive insert tool 734/5 3/8" Inside Square -drive, for use with SERVICE-MANOSKOP torque wrench No 730/2.
Pin wrench 12717 offset, distance between pins 18 mm, pin dia. Diameter in mm 2.9 mm, length 140 mm, for ring nut of tension pulley on 1.6 l diesel.
Standard-MANOSKOPtorque wrench 720NF/80 capacity 160-800 N m, 3/4" Inside Square -drive
SERVICE-MANOSKOPtorque wrench 730/5 capacity 5-50 N m, for general service work.
Ring insert tool 732/10-13 size 13 mm, for use withSERVICE-MANOSKOP torque wrench No 730/5.
Square drive insert tool 734/10 1/2" Outside Square -drive, for use withSERVICE-MANOSKOP torque wrench No 730/5.
Ratchet insert tool 735/10 reversible, 1/2" Outside Square -drive, for use withSERVICE-MANOSKOP torque wrench No 730/5.
SERVICE-MANOSKOPtorque wrench 730/20 capacity 40-200 N m.
Square drive insert tool 734/20 1/2" Outside Square -drive, for use withSERVICE-MANOSKOP torque wrench No 730/20.
Ratchet insert tool 735/20 reversible, 1/2" Outside Square -drive, for use withSERVICE-MANOSKOP torque wrench No 730/20.
SERVICE-MANOSKOPtorque wrench 730/40 capacity 80-400 N m.
Square drive insert tool 734/40 3/4" Outside Square -drive, for use withSERVICE-MANOSKOP torque wrench No 730/40.
Ratchet insert tool 735/40 reversible, 3/4" Outside Square -drive, for use withSERVICE-MANOSKOP torque wrench No 730/40.
Hose clip pliers 12619 with outside hexagon, size 19 mm, 3/8" Inside Square -drive, for use on steel spring clamps on exhaust pipe flange.
Bit screwdriver socket 1421 for inside TORX® screws, outside Outside Hexagon 1/4" C 6,3 size T45, length 26 mm, for use on door hinges.Drive Tools:f.e. ratchet reversible No 725/4B and ratchet tap holder No 1820or ... more
特殊汽修工具 >> Volvo tools
Valve adjustment tool 12960* for depressing tappets.for use with clearance disc pliers No 12956.
Valve clearance disc pliers 12956* reinforced tips with milled profile for better grasp of disc, for exchange of discs.
Universal torque limiter 7600 15-35 N m, adjustable, cut-out, 3/8" Inside Square -drive, for spark plugs.
T-handle 3425 length 300 mm, 3/8" Outside Square -drive
Socket plug 1056-8 for square socket head screws, size 8 mm, 1/2" Inside Square -drive, for drain plug on sump.
Socket plug 1056-10* size 10 mm