| 拔輪器 >> Pullers |
|
Standard pullers |
11050 |
two-armed, with sliding permanently parallel extractor hooks, zinc plated; for extracting gearwheels, ball bearings, pulleys and similar parts from shafts or axles;for removing ball bearings, bearing ... more |
| No Picture |
Arms for pullers No 11050/11051 |
H 11050 |
|
|
Standard pullers |
11053 |
two-armed, with swivelling extractor hooks for larger reaches, zinc plated;for extracting gearwheels, ball bearings, pulleys and similar parts from shafts or axles;hooks can be used as internal or ... more |
|
Standard pullers |
11051 |
three-armed, with sliding permanently parallel extractor hooks, zinc plated;for extracting gearwheels, ball bearings, pulleys, fan wheels and similar parts from shafts or axles;for removing ball ... more |
|
Pullers |
11054 |
three-armed, with swivelling extractor hooks for larger reaches, zinc plated;for extracting gearwheels, ball bearings, pulleys and similar parts from shafts or axles;hooks can be used as internal or ... more |
|
Pullers |
12150 |
two-armed version with swivelling, double-action extractor hooks, zinc plated;for extracting gearwheels, ball bearings, pulleys and similar parts from shafts or axles;for removing ball bearings, ... more |
|
Three arm pullers |
12152 |
three-armed version with swivelling, double-action extractor hooks, zinc plated;for extracting gearwheels, ball bearings, pulleys and similar parts from shafts or axles;for removing ball bearings, ... more |
|
Two arm pullers |
11055 |
two-armed, with swivelling extractor hooks and lateral clamp clip, zinc plated;when the clamp clip is tightened, the claws of the extractor hooks locate under the part to be extracted and lever it ... more |
|
Battery terminal puller |
11040 |
two-armed, with a self-centring quick-action clamp and automatic feed, zinc plated;for extracting battery terminal clamps, smaller ball bearings, pulleys etc.;as force is applied through the spindle, ... more |
|
Battery terminal puller |
11042 |
three-armed, with a self-centring quick-action clamp and automatic feed, zinc plated;for extracting battery terminal clamps, smaller ball bearings, pulleys etc.;as force is applied through the ... more |
|
Internal puller |
11060 |
for extracting ball bearings, bearing outer races and bushes, zinc plated; to be used with Counter StayNo 11061;even bearings which are tight up against the walls are securely gripped due to the ... more |
| No Picture |
Counter stay |
11061 |
to be used with Internal Puller No 11060; zinc plated;insert and open up the internal puller;screw the spindle of the counter-stay into the internal puller;extract the workpiece. |
|
Separating fixture |
12613 |
zinc plated; for use with No 12614 of same sizes;for separating and extracting ball bearings, roller bearings, bushes, wheels and other tightly fitting parts;applying uniform pulling force to the ... more |
|
Pullers |
12614 |
zinc plated; for use with No 12613 of same sizes;for extracting ball bearings, roller bearings, bushes, wheels and other tight fitting parts;the puller is connected to separator No 12613 to enable ... more |
|
Extensions |
V 12614 |
for use with puller No 12614;extensions for the extraction bolts on the puller for use with longer workpieces. |
|
Universal wheel hub puller |
11030 |
with three extractor hooks, zinc plated;for extracting wheel hubs on HGV's and cars up to a hole diameter of 225 mm;the axially mounted threaded bush enables the workpiece to be freed by gently ... more |
| No Picture |
Arms for No 11030 |
11035 |
|
|
Universal wheel hub puller |
11030-6 |
with six extractor hooks, zinc plated;for extracting HGV wheel hubs up to a hole diameter of 350 mm;the slot-guided extractor hooks have extra long reach and are absolutely non-slip; gentle tapping ... more |
| No Picture |
Arm for No 11030-6 |
H 11030 |
|
|
Ball joint separators |
11041 |
for forcing out ball pins on vehicles, zinc plated. |
| No Picture |
Spindles |
ID10552 |
|
|
Universal ball joint separator |
12616 |
zinc plated, DIN/ISO 7803, for extracting ball-joints on cars and light delivery vans. |
|
Ball joint separator |
12623 |
zinc plated; for extracting ball-joints especially on BMW, DaimlerChrysler, Fiat, Ford, Nissan, Opel, Toyota, VW/Audi and Volvo cars. |
|
Ball joint separator |
12623-1 |
for vehicles with aluminium chassis; zinc plated;for extracting ball-joints, especially on AUDI A6 and A8 after model year 1999 and for other vehicles with limited work space. |
|
Ball joint separator |
12623-2 |
on medium-sized commercial vehicles, buses and construction site vehicles; zinc plated. |
|
Ball joint separator |
12623-3 |
on heavy goods vehicles, buses and construction site vehicles;zinc plated. |
|
Ball joint separator |
12623-4 |
on medium-sized and heavy HGV's, buses and construction site and other special vehicles; zinc plated |
